thank you for subscribing to your personalised job alerts.

    6 jobs found for computer

    filter1
    • specialism1
      working in
      show 6 jobs
      clear filter
    • location
      location & range
        show 6 jobs
        clear filter
      • job types
        job types
        show 6 jobs
        clear filter
      • salary
        salary
        show 6 jobs
        clear filter
      clear all
        • netherlands, international
        • temporary
        • negotiable
        • full-time
        Magazijn Medewerker / Luchtvaart Voor een tijdelijke opdracht van 2 á 3 maanden, zijn wij op zoek naar een ervaren magazijn medewerker met een achtergrond in de luchtvaarttechniek. De taken zijn als volgt: Ontvangen en controleren van binnenkomende vliegtuigonderdelenInspecteren van vliegtuigonderdelen en kunnen bepalen of deze voldoen aan de technische specificaties op basis van bijgeleverde documenten en certificatenAftekenen van componenten ter vrijgave voor opslag en uitgifteSignaleren van afwijkingen en deze rapporteren aan de Supervisor en/of betrokken afdelingen. Op basis van ontvangen instructies en verzenddocumenten verder afhandelen van de inspectie. Indien nodig gereedzetten van goederen ter retournering aan leveranciers.Scannen van goederengegevens, inclusief mutaties m.b.v. scanapparatuurOnderdelen fotograferen t.b.v. verkoop en klaarmaken voor verzendingHet assisteren van collega's Stores en Shipping bij twijfels over correctheid of compleetheid van certificering van onderdelen Vacature- eisen:MBO werk- en denkniveauTechnische achtergrond in de luchtvaartWerken met meetgereedschappenBeheersing van de Engelse Taal op het gebied van warehousehandlingAccuratesseFlexibelKlantgerichtOrde en netheidSamenwerking/teamgerichtheidZelfstandig werkenStressbestendigheidFysiek zwaar werk aankunnenLang achter een computer kunnen werkenVaardigheid met Apple Mac Computer is een pré Bijzonderheden:Dagdiensten - Geen weekendenReiskostenvergoeding á € 0,19 cent per gereden kilometerLocatie: Omgeving Rotterdam / DelftGoede werksfeer met aandacht voor teamspirit
        Magazijn Medewerker / Luchtvaart Voor een tijdelijke opdracht van 2 á 3 maanden, zijn wij op zoek naar een ervaren magazijn medewerker met een achtergrond in de luchtvaarttechniek. De taken zijn als volgt: Ontvangen en controleren van binnenkomende vliegtuigonderdelenInspecteren van vliegtuigonderdelen en kunnen bepalen of deze voldoen aan de technische specificaties op basis van bijgeleverde documenten en certificatenAftekenen van componenten ter vrijgave voor opslag en uitgifteSignaleren van afwijkingen en deze rapporteren aan de Supervisor en/of betrokken afdelingen. Op basis van ontvangen instructies en verzenddocumenten verder afhandelen van de inspectie. Indien nodig gereedzetten van goederen ter retournering aan leveranciers.Scannen van goederengegevens, inclusief mutaties m.b.v. scanapparatuurOnderdelen fotograferen t.b.v. verkoop en klaarmaken voor verzendingHet assisteren van collega's Stores en Shipping bij twijfels over correctheid of compleetheid van certificering van onderdelen Vacature- eisen:MBO werk- en denkniveauTechnische achtergrond in de luchtvaartWerken met meetgereedschappenBeheersing van de Engelse Taal op het gebied van warehousehandlingAccuratesseFlexibelKlantgerichtOrde en netheidSamenwerking/teamgerichtheidZelfstandig werkenStressbestendigheidFysiek zwaar werk aankunnenLang achter een computer kunnen werkenVaardigheid met Apple Mac Computer is een pré Bijzonderheden:Dagdiensten - Geen weekendenReiskostenvergoeding á € 0,19 cent per gereden kilometerLocatie: Omgeving Rotterdam / DelftGoede werksfeer met aandacht voor teamspirit
        • milton keynes, south east
        • contract
        • £35.00 - £40.00 per hour
        • full-time
        Senior Analysis Engineer required on a contract basis to join an industry leading engineering and manufacturing business.Are you looking for an exciting opportunity at the forefront of battery technology? Do you have a background strategically controlling the design and development of components and systems? Have you got strong analytical skills, experienced in using multi-physics optimization tools and previous experience in thermal/ mechanical analysis? If you are seeking an exciting challenge then this is the role for you!In this role you will need a solid background and understanding in:Engineering fundamentals (dynamics, mechanics and thermodynamics)Design experience, able to make adjustments to existing models and provide sound design direction to improve components/systems ability to meet requirementsAbility to break down mechanical and thermal requirements into analytical tasks and pass-fail criteria to asses designsExperienced in interpreting and correlating to empirical data (time based accelerometer data, Frequency response plots, thermocouple data... etc.)Skilled in Ansys Workbench tools in both structural and thermal analysis essential ( transient structural, Harmonic response, random vibration.. etc.)Skilled in Explicit Dynamics for crash and drop analysis (LS Dyna, Ansys Explicit Dynamics)Experienced in using multi-physics optimization toolsGood reporting skills with the ability to portray analysis results to a wide range of audience and effectively providing guidance to key stakeholdersExperienced in scripting and automating repetitive tasks is a bonus.The role:This applied science position conducts numerical computations via third party and in-house tools to determine structural performance of components and systems.Evaluates software and methods and provides improvement recommendations.The results from the computer models are used to determine the validity of the design to meet the customer requirements.Design recommendations are then provided as needed.Obtains input and negotiates with Design, Thermal Sciences, Materials and Product Validation and delivers key structural performance parameters like motion, load, natural frequencies, stress, design margin, life, sound power, etc. to Design and Product Validation.Makes decisions in the area of structural design (materials and their processing as well as geometry) that impact structural performance (motion, load, natural frequencies, stress, design margin, life, sound power, etc.) of components and systemsApplies and improves computer modelling processes that estimate motion, load, natural frequencies, stress, design margin, life, sound power, etc. and tools such as ANSYS, FE-Safe, GT-Suite, and AVL Excite required to support the processes and enable high quality decision making.Provides independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team.Delivers independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site.Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.Provides support and guidance to influence technical direction within a project team and continues to develop proficiency in the competency areas critical to success in the role.Operates as a recognized specialist in a discipline or product area within the immediate team.Essential experience:College, university, or equivalent Bachelor's degree in Engineering or other relevant technical disciplines is required. Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making.Preferred candidates would have a mix of experience using MS Office tools, Matlab, Python, APDLANSYS, FORTRAN or C programming, Windows/Linux operating systems, and desktop/remote high performance computing hardware systems.This is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. You will be part of a small, friendly team working together to deliver programmes that are critical to the long-term success of a respected, global company. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Senior Analysis Engineer required on a contract basis to join an industry leading engineering and manufacturing business.Are you looking for an exciting opportunity at the forefront of battery technology? Do you have a background strategically controlling the design and development of components and systems? Have you got strong analytical skills, experienced in using multi-physics optimization tools and previous experience in thermal/ mechanical analysis? If you are seeking an exciting challenge then this is the role for you!In this role you will need a solid background and understanding in:Engineering fundamentals (dynamics, mechanics and thermodynamics)Design experience, able to make adjustments to existing models and provide sound design direction to improve components/systems ability to meet requirementsAbility to break down mechanical and thermal requirements into analytical tasks and pass-fail criteria to asses designsExperienced in interpreting and correlating to empirical data (time based accelerometer data, Frequency response plots, thermocouple data... etc.)Skilled in Ansys Workbench tools in both structural and thermal analysis essential ( transient structural, Harmonic response, random vibration.. etc.)Skilled in Explicit Dynamics for crash and drop analysis (LS Dyna, Ansys Explicit Dynamics)Experienced in using multi-physics optimization toolsGood reporting skills with the ability to portray analysis results to a wide range of audience and effectively providing guidance to key stakeholdersExperienced in scripting and automating repetitive tasks is a bonus.The role:This applied science position conducts numerical computations via third party and in-house tools to determine structural performance of components and systems.Evaluates software and methods and provides improvement recommendations.The results from the computer models are used to determine the validity of the design to meet the customer requirements.Design recommendations are then provided as needed.Obtains input and negotiates with Design, Thermal Sciences, Materials and Product Validation and delivers key structural performance parameters like motion, load, natural frequencies, stress, design margin, life, sound power, etc. to Design and Product Validation.Makes decisions in the area of structural design (materials and their processing as well as geometry) that impact structural performance (motion, load, natural frequencies, stress, design margin, life, sound power, etc.) of components and systemsApplies and improves computer modelling processes that estimate motion, load, natural frequencies, stress, design margin, life, sound power, etc. and tools such as ANSYS, FE-Safe, GT-Suite, and AVL Excite required to support the processes and enable high quality decision making.Provides independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team.Delivers independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site.Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.Provides support and guidance to influence technical direction within a project team and continues to develop proficiency in the competency areas critical to success in the role.Operates as a recognized specialist in a discipline or product area within the immediate team.Essential experience:College, university, or equivalent Bachelor's degree in Engineering or other relevant technical disciplines is required. Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making.Preferred candidates would have a mix of experience using MS Office tools, Matlab, Python, APDLANSYS, FORTRAN or C programming, Windows/Linux operating systems, and desktop/remote high performance computing hardware systems.This is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. You will be part of a small, friendly team working together to deliver programmes that are critical to the long-term success of a respected, global company. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • city of london, london
        • permanent
        • £37,000 - £38,000 per year
        • full-time
        M&E Shift Engineer- BMS - £38,000 We are currently looking for an experienced M&E Shift Engineer with a BMS / Controls bias and knowledge of Continuum and StruxureWare systems to work at a large static building in Central London on a 4 on 4 off shift rota (2 days on, 2 nights on, 4 days off) - Hours are 8.00/8.00 To ensure all environmental conditions are maintained at all times on the BMS system with regard to critical building systems. To identify, investigate/Rectify and know when to escalate any alarm that cannot be cleared through the correct channels.To assist in Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and electrical systems within the site (controlling BMS changeovers/isolations). Engineers must be able to demonstrate relevant knowledge of Building services with an electrical background, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. MAIN DUTIES AND RESPONSIBILITIESTo deliver the following:Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times.Monitor the BMS systems and identify critical alarms that would impact the operation of the building and react accordingly in a timely manner.Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.Ensure that Method Statements and Risk Assessments are prepared, and used for all tasks undertaken to ensure safe working practices at all times.Ensure up to date shift logs are kept at all timesEnsure an awareness and compliance to the contractual KPI's/SLA's.Ensure Computer Based Maintenance system, e.g. Planon , is kept up to date and that PPM and reactive tickets are closed out with accurate data captured.To operate a Permit to Work System in accordance with Quality, Health & Safety procedures and client requirements (or approved client system).ACCOUNTABILITIESAccountable to Shift Manager with daytime coordination by the BMS technical systems Engineer.The post holder does not have any directly reporting staffSKILLS & QUALIFICATIONSGood all round knowledge of Building Services, diagnostic and repair procedures, Knowledge of BMS systems and interpretation of alarms.PERSON SPECIFICATIONA good education is essential, with good written and spoken EnglishTraining Formally trained in electrical/mechanical / BMS Knowledge of Continuum and StruxureWareExperience [Essential] Experience of BMS systems / operating & monitoring.Experience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria.Good all round knowledge of building services systems, diagnostic and repair procedures[Desirable] Mechanical maintenance skillsRecognised Health and Safety Qualification, such as IOSH Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        M&E Shift Engineer- BMS - £38,000 We are currently looking for an experienced M&E Shift Engineer with a BMS / Controls bias and knowledge of Continuum and StruxureWare systems to work at a large static building in Central London on a 4 on 4 off shift rota (2 days on, 2 nights on, 4 days off) - Hours are 8.00/8.00 To ensure all environmental conditions are maintained at all times on the BMS system with regard to critical building systems. To identify, investigate/Rectify and know when to escalate any alarm that cannot be cleared through the correct channels.To assist in Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and electrical systems within the site (controlling BMS changeovers/isolations). Engineers must be able to demonstrate relevant knowledge of Building services with an electrical background, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. MAIN DUTIES AND RESPONSIBILITIESTo deliver the following:Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times.Monitor the BMS systems and identify critical alarms that would impact the operation of the building and react accordingly in a timely manner.Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.Ensure that Method Statements and Risk Assessments are prepared, and used for all tasks undertaken to ensure safe working practices at all times.Ensure up to date shift logs are kept at all timesEnsure an awareness and compliance to the contractual KPI's/SLA's.Ensure Computer Based Maintenance system, e.g. Planon , is kept up to date and that PPM and reactive tickets are closed out with accurate data captured.To operate a Permit to Work System in accordance with Quality, Health & Safety procedures and client requirements (or approved client system).ACCOUNTABILITIESAccountable to Shift Manager with daytime coordination by the BMS technical systems Engineer.The post holder does not have any directly reporting staffSKILLS & QUALIFICATIONSGood all round knowledge of Building Services, diagnostic and repair procedures, Knowledge of BMS systems and interpretation of alarms.PERSON SPECIFICATIONA good education is essential, with good written and spoken EnglishTraining Formally trained in electrical/mechanical / BMS Knowledge of Continuum and StruxureWareExperience [Essential] Experience of BMS systems / operating & monitoring.Experience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria.Good all round knowledge of building services systems, diagnostic and repair procedures[Desirable] Mechanical maintenance skillsRecognised Health and Safety Qualification, such as IOSH Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • city of london, london
        • permanent
        • £37,000 - £38,000 per year
        • full-time
        M&E Shift / Boiler Plant Engineer, (BOAS) - £38,000 We are currently looking for an experienced M&E Shift / Boiler Plant Engineer with a BMS / Controls bias and knowledge of Continuum and StruxureWare systems to work at a large static building in Central London on a 4 on 4 off shift rota (2 days on, 2 nights on, 4 days off) - Hours are 8.00/8.00 To ensure all environmental conditions are always maintained with regard to critical building systems by carrying out Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and appropriate electrical systems within the site. Engineers must be able to demonstrate relevant knowledge of Steam and LTHW boilers, steam systems, calorifiers, chillers, pumps, valves, Crac Units, CAVs, VAVs, FCUs and AHUs. In addition, they must be able to demonstrate some knowledge of other systems such as UPS, Generators, HV, PDUs, Crac units, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data.MAIN DUTIES AND RESPONSIBILITIESTo deliver the following:Ensure that routine PPM is carried out to all mechanical and electrical plant in accordance with Site task schedules and asset lists.Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made.Ensure that plant faults and defects are always swiftly remedied to maintain plant in serviceable order.Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works.Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.Ensure that Method Statements and Risk Assessments are always prepared and used for all tasks undertaken to ensure safe working practices.Ensure up to date shift logs are always keptEnsure that all plant rooms are always locked and are kept in a clean and tidy condition.Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance.To ensure tasks as directed are completed with the appropriate H&S awareness/implementation.Ensure an awareness and compliance to the contractual KPI's/SLA's.Ensure Computer Based Maintenance system, e.g. Maximo, Planon, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured.To operate a Permit to Work System in accordance with Quality, Health & Safety procedures and client requirementsACCOUNTABILITIESAccountable to Shift Manager and the accounts management team.The post holder does not have any directly reporting staffSKILLS & QUALIFICATIONSGood all-round knowledge of general building works, diagnostic and repair procedures, working knowledge of building services systems and maintenance schedules.PERSON SPECIFICATIONSteam boiler qualifications such as D6 and BOASFormally trained in electrical/mechanical maintenance / BMS Knowledge.Recognised Health and Safety Qualification, such as IOSHExperience of operating and maintaining steam boilers and steam systemsExperience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria.Mechanical maintenance skillsGood verbal communication and written English skillsCommitted to the delivery of excellent customer service. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        M&E Shift / Boiler Plant Engineer, (BOAS) - £38,000 We are currently looking for an experienced M&E Shift / Boiler Plant Engineer with a BMS / Controls bias and knowledge of Continuum and StruxureWare systems to work at a large static building in Central London on a 4 on 4 off shift rota (2 days on, 2 nights on, 4 days off) - Hours are 8.00/8.00 To ensure all environmental conditions are always maintained with regard to critical building systems by carrying out Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and appropriate electrical systems within the site. Engineers must be able to demonstrate relevant knowledge of Steam and LTHW boilers, steam systems, calorifiers, chillers, pumps, valves, Crac Units, CAVs, VAVs, FCUs and AHUs. In addition, they must be able to demonstrate some knowledge of other systems such as UPS, Generators, HV, PDUs, Crac units, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data.MAIN DUTIES AND RESPONSIBILITIESTo deliver the following:Ensure that routine PPM is carried out to all mechanical and electrical plant in accordance with Site task schedules and asset lists.Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made.Ensure that plant faults and defects are always swiftly remedied to maintain plant in serviceable order.Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works.Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator.Ensure that Method Statements and Risk Assessments are always prepared and used for all tasks undertaken to ensure safe working practices.Ensure up to date shift logs are always keptEnsure that all plant rooms are always locked and are kept in a clean and tidy condition.Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance.To ensure tasks as directed are completed with the appropriate H&S awareness/implementation.Ensure an awareness and compliance to the contractual KPI's/SLA's.Ensure Computer Based Maintenance system, e.g. Maximo, Planon, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured.To operate a Permit to Work System in accordance with Quality, Health & Safety procedures and client requirementsACCOUNTABILITIESAccountable to Shift Manager and the accounts management team.The post holder does not have any directly reporting staffSKILLS & QUALIFICATIONSGood all-round knowledge of general building works, diagnostic and repair procedures, working knowledge of building services systems and maintenance schedules.PERSON SPECIFICATIONSteam boiler qualifications such as D6 and BOASFormally trained in electrical/mechanical maintenance / BMS Knowledge.Recognised Health and Safety Qualification, such as IOSHExperience of operating and maintaining steam boilers and steam systemsExperience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria.Mechanical maintenance skillsGood verbal communication and written English skillsCommitted to the delivery of excellent customer service. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • peterborough, east of england
        • contract
        • £30.75 - £32.75 per hour
        • full-time
        Application & Installation Engineer required on a contract basis to join an industry leading engineering and manufacturing business.Are you looking for an exciting opportunity at the forefront of off highway machine technology? Do you have a background strategically controlling the design and development of components and systems? Have you got experience of working in a fast paced engineering and manufacturing environment? If you are seeking an exciting challenge then this is the role for you!As an Application & Installation Engineer you will play a key role in a team to manage all aspects of the Product Lifecycle as well as the technical and commercial relationship with customers. You will deliver vertically integrated engine applications for our customers. The role acts as a single point of contact for all technical aspects regarding new product introduction along with supporting the Customer with their machine development programmes.You will also be responsible for managing engine related installation issues through the engine and machine development processes. This is a diverse role which will require an ability to work and collaborate across cultures, time zones and roles globally. This is a great opportunity to be involved with the introduction of innovative products and services and to work with teams based in North America, China. Brazil, India and Europe.The role:Responsible for engine selection and completion of projects on time and on cost through close collaboration with Machine Technical Lead EngineersManagement of Application & Installation (A&I) requirements with the customer, leading to A&I sign off ahead of machine production start.Engine specification support through product life cycle, managing changes through new option requests.Provide Machine Voice of the Customer to help develop new power system products and drive customer focused product design & development.Support customer collaboration events such as product development workshops either in the UK or at customer machine plants.Mediate between Industrial Power Systems Division and Customers to maximise enterprise value and ensure successful resolution of engine/machine integration issues.Support Continuous Product Improvements adding knowledge on machine installations.Stay abreast of new New Product Development issues and ensure that the impact to customers is understood and communicated.Essential experienceHNC / Degree Qualified or equivalent practical experience within an engineering disciplineUnderstanding of engine performance, design, field testing or manufacturingAn excellent communicator who is technical information effectively with team members and at all levels within the Industrial Power System Division, supporting teams and customers.Ability to plan and drive actions through all levels of an organisationOrganised and structured when approaching work tasks and a proven ability to develop and deliver to plans.Candidates may have gained the following skills and experience through previous roles:In depth technical understanding of engines and associated emissions management systemsBachelor degree in an accredited Engineering, Computer Science, or Materials ScienceThis is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. You will be part of a small, friendly team working together to deliver programmes that are critical to the long-term success of a respected, global company. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Application & Installation Engineer required on a contract basis to join an industry leading engineering and manufacturing business.Are you looking for an exciting opportunity at the forefront of off highway machine technology? Do you have a background strategically controlling the design and development of components and systems? Have you got experience of working in a fast paced engineering and manufacturing environment? If you are seeking an exciting challenge then this is the role for you!As an Application & Installation Engineer you will play a key role in a team to manage all aspects of the Product Lifecycle as well as the technical and commercial relationship with customers. You will deliver vertically integrated engine applications for our customers. The role acts as a single point of contact for all technical aspects regarding new product introduction along with supporting the Customer with their machine development programmes.You will also be responsible for managing engine related installation issues through the engine and machine development processes. This is a diverse role which will require an ability to work and collaborate across cultures, time zones and roles globally. This is a great opportunity to be involved with the introduction of innovative products and services and to work with teams based in North America, China. Brazil, India and Europe.The role:Responsible for engine selection and completion of projects on time and on cost through close collaboration with Machine Technical Lead EngineersManagement of Application & Installation (A&I) requirements with the customer, leading to A&I sign off ahead of machine production start.Engine specification support through product life cycle, managing changes through new option requests.Provide Machine Voice of the Customer to help develop new power system products and drive customer focused product design & development.Support customer collaboration events such as product development workshops either in the UK or at customer machine plants.Mediate between Industrial Power Systems Division and Customers to maximise enterprise value and ensure successful resolution of engine/machine integration issues.Support Continuous Product Improvements adding knowledge on machine installations.Stay abreast of new New Product Development issues and ensure that the impact to customers is understood and communicated.Essential experienceHNC / Degree Qualified or equivalent practical experience within an engineering disciplineUnderstanding of engine performance, design, field testing or manufacturingAn excellent communicator who is technical information effectively with team members and at all levels within the Industrial Power System Division, supporting teams and customers.Ability to plan and drive actions through all levels of an organisationOrganised and structured when approaching work tasks and a proven ability to develop and deliver to plans.Candidates may have gained the following skills and experience through previous roles:In depth technical understanding of engines and associated emissions management systemsBachelor degree in an accredited Engineering, Computer Science, or Materials ScienceThis is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. You will be part of a small, friendly team working together to deliver programmes that are critical to the long-term success of a respected, global company. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • corby, east midlands
        • permanent
        • £55,609 - £55,609, per year, Company Benefits
        • full-time
        Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in raw material manufacturer. We are currently looking for a Electrical Team Leader to join the team, at their site in Corby. This postition is on a continental shift pattern. The RoleAs the Electrical Team Leader, you will work as part of a team, reporting directly into the Electrical Services Engineering Manager, providing technical engineering expertise to the Corby site 24 hours a day, 365 days a year, to ensure the safe production of quality tubes and the achievement of equipment availability and capability targets. In this capacity, you will also manage the daily operations of the Systems department supporting the team leader to ensure that systems are maintained in accordance with standards and policies.Your key responsibilities will include, but not be limited to the following:Responsible for ensuring that engineering activities are conducted in accordance with the Engineering policy; health & Safety standards; statutory regulations and applicable ISO standards and Codes of Practice.Actively manage engineering expenditure and develop budgets.Responsible for the management and execution of all preventive, corrective, breakdown and shutdown maintenance controlled by the central electrical function, as per the SAP Business processes.Ensure that all assets within the designated areas of responsibility are maintained to high engineering standards, which consistently contribute to achieving business objectives.Identify and implement improvement activities that support the continuous improvement of plant availability, safety, the environment and asset performance.Lead or participate in project teams, executing engineering projects to the allocated budget, timescale and stated objectives.Responsible for the management of spares, including repairable stock items (as per the SAP Refurbishment of Spares Business Process).Management of both external and internal engineering resources, including technical supervision, training and competency development.To set, implement and maintain standards for equipment controlled by the systems department.To manage overtime and sickness absence for members of the Systems department.Respond to the works alarm systems and provide solutions for plant and engineering safety The CandidateTo be considered for this opportunity, you must be a qualified electrical engineer (or equivalent by experience), ideally qualified to HNC level as a minimum, with man management experience of working within a manufacturing environment. You will also require the following:Experience with low voltage & high voltage electrical systems, drives, PLCs and Environmental control systems.Competent at fault-finding electrical systems and root cause failure analysis of electrical engineering related failures as required.Experience of working with computerised maintenance management systems (SAP PM experience would be advantageous)Basic computer literacy is essential.Good communication skill and the ability to function effectively within teams. The Benefits54 days holidays per yearQuarterly Bonus - subject to business performanceOne of the UK's leading pension schemes (10% employer contribution / 6% employee contribution)Private HealthcareAnnual Pay Review Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Electrical Engineer An opportunity has arisen for us to recruit for a worldwide leader in raw material manufacturer. We are currently looking for a Electrical Team Leader to join the team, at their site in Corby. This postition is on a continental shift pattern. The RoleAs the Electrical Team Leader, you will work as part of a team, reporting directly into the Electrical Services Engineering Manager, providing technical engineering expertise to the Corby site 24 hours a day, 365 days a year, to ensure the safe production of quality tubes and the achievement of equipment availability and capability targets. In this capacity, you will also manage the daily operations of the Systems department supporting the team leader to ensure that systems are maintained in accordance with standards and policies.Your key responsibilities will include, but not be limited to the following:Responsible for ensuring that engineering activities are conducted in accordance with the Engineering policy; health & Safety standards; statutory regulations and applicable ISO standards and Codes of Practice.Actively manage engineering expenditure and develop budgets.Responsible for the management and execution of all preventive, corrective, breakdown and shutdown maintenance controlled by the central electrical function, as per the SAP Business processes.Ensure that all assets within the designated areas of responsibility are maintained to high engineering standards, which consistently contribute to achieving business objectives.Identify and implement improvement activities that support the continuous improvement of plant availability, safety, the environment and asset performance.Lead or participate in project teams, executing engineering projects to the allocated budget, timescale and stated objectives.Responsible for the management of spares, including repairable stock items (as per the SAP Refurbishment of Spares Business Process).Management of both external and internal engineering resources, including technical supervision, training and competency development.To set, implement and maintain standards for equipment controlled by the systems department.To manage overtime and sickness absence for members of the Systems department.Respond to the works alarm systems and provide solutions for plant and engineering safety The CandidateTo be considered for this opportunity, you must be a qualified electrical engineer (or equivalent by experience), ideally qualified to HNC level as a minimum, with man management experience of working within a manufacturing environment. You will also require the following:Experience with low voltage & high voltage electrical systems, drives, PLCs and Environmental control systems.Competent at fault-finding electrical systems and root cause failure analysis of electrical engineering related failures as required.Experience of working with computerised maintenance management systems (SAP PM experience would be advantageous)Basic computer literacy is essential.Good communication skill and the ability to function effectively within teams. The Benefits54 days holidays per yearQuarterly Bonus - subject to business performanceOne of the UK's leading pension schemes (10% employer contribution / 6% employee contribution)Private HealthcareAnnual Pay Review Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

      thank you for subscribing to your personalised job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.