thank you for subscribing to your personalised job alerts.

    15 jobs found for engineers

    filter1
    • specialism1
      working in
      show 15 jobs
      clear filter
    • location
      location & range
        show 15 jobs
        clear filter
      • job types
        job types
        show 15 jobs
        clear filter
      • salary
        salary
        show 15 jobs
        clear filter
      clear all
        • malta, international
        • contract
        • €38 per year
        • full-time
        Qualitair are recruiting B2 Licensed Engineers to start immediately in EU. You must be Recent B2 Licensed Engineer on A350 Required Documentation: Up to date CV Part 66 B1 License Type certificates Recency letter Last authorisation/approval In date EWIS FT HF In date EU Passport If you interested please apply and we will contact suitable candidates with more information
        Qualitair are recruiting B2 Licensed Engineers to start immediately in EU. You must be Recent B2 Licensed Engineer on A350 Required Documentation: Up to date CV Part 66 B1 License Type certificates Recency letter Last authorisation/approval In date EWIS FT HF In date EU Passport If you interested please apply and we will contact suitable candidates with more information
        • malta, international
        • contract
        • €38 per year
        • full-time
        Qualitair are recruiting B2 Licensed Engineers to start immediately in Malta You must be Recent B2 Licensed Engineer on A350 Required Documentation: Up to date CV Part 66 B1 License Type certificates Recency letter Last authorisation/approval In date EWIS FT HF In date EU Passport If you interested please apply and we will contact suitable candidates with more information
        Qualitair are recruiting B2 Licensed Engineers to start immediately in Malta You must be Recent B2 Licensed Engineer on A350 Required Documentation: Up to date CV Part 66 B1 License Type certificates Recency letter Last authorisation/approval In date EWIS FT HF In date EU Passport If you interested please apply and we will contact suitable candidates with more information
        • waterlooville, south east
        • permanent
        • £44,000 - £50,000 per year
        • full-time
        Are you an experienced Project manager? Do you have experience leading teams of people in an oil/gas environment? If so… then this is the role for you!An exciting opportunity has opened up with a lead automation company in hampshire. I am currently recruiting for a Software Control Systems Team Leader/Project Manager to look after a small team of 6 engineers, reporting into the regional leader, helping to deliver projects to the company's key accounts.Main Responsibilities:* whole life cycle of delivering projects from quoting to completion * identify when gaps and overloads may exist in the team's workload * Lead a team of engineers, to ensure that projects are delivered on time, within budget and to quality standards * Identify, manage and mitigate project risks * Contract review/ negotiation * Ensuring customers' expectations are clearly set out and met * Attending site for Surveys / Client Meetings & Onsite working* Review future project requirements/ identifying training & development opportunities for your teamRequired Skills and Experience:* Good Attitude, Adaptable, Resilient, Happy worker* Contractual awareness* Experience in an engineering environment * leadership skills * Ability to work unsupervised * Build relationships with customers, suppliers and colleagues * Experience of managing control system, PLC and SCADA, type projects * Understanding of PLC & SCADA Control systems* Experience in Oil & Gas / Functional Safety systems desirable but not essential * Good working knowledge of Microsoft Office incl. Word, Excel & OutlookThis role includes the following benefits:* Flexible working hours - 37.5 hours per week * remote working available * 25 days holiday * Profit share scheme * Workplace Pension * Cycle to work scheme * IET Membership * Access to transport for site activities * £500 Training allowance per year for work related development Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Are you an experienced Project manager? Do you have experience leading teams of people in an oil/gas environment? If so… then this is the role for you!An exciting opportunity has opened up with a lead automation company in hampshire. I am currently recruiting for a Software Control Systems Team Leader/Project Manager to look after a small team of 6 engineers, reporting into the regional leader, helping to deliver projects to the company's key accounts.Main Responsibilities:* whole life cycle of delivering projects from quoting to completion * identify when gaps and overloads may exist in the team's workload * Lead a team of engineers, to ensure that projects are delivered on time, within budget and to quality standards * Identify, manage and mitigate project risks * Contract review/ negotiation * Ensuring customers' expectations are clearly set out and met * Attending site for Surveys / Client Meetings & Onsite working* Review future project requirements/ identifying training & development opportunities for your teamRequired Skills and Experience:* Good Attitude, Adaptable, Resilient, Happy worker* Contractual awareness* Experience in an engineering environment * leadership skills * Ability to work unsupervised * Build relationships with customers, suppliers and colleagues * Experience of managing control system, PLC and SCADA, type projects * Understanding of PLC & SCADA Control systems* Experience in Oil & Gas / Functional Safety systems desirable but not essential * Good working knowledge of Microsoft Office incl. Word, Excel & OutlookThis role includes the following benefits:* Flexible working hours - 37.5 hours per week * remote working available * 25 days holiday * Profit share scheme * Workplace Pension * Cycle to work scheme * IET Membership * Access to transport for site activities * £500 Training allowance per year for work related development Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • worthing, south east
        • temporary
        • £33.49 - £34.49 per hour
        • full-time
        Are you an expereineced Electronic Hardware Design Engineer? Are you looking for an exciting opportunity within one of the UKs largest electric brands? Are you looking for more autonomy to propose/develop solutions?If you have answered yes to the questions above, we have a fantastic role for you. As an Electronics Hardware, Senior Design Engineer you will be expected to take responsibility for all technical activities of design to develop new or maintain current Offers. This involves analysing requirements to derive specifications, developing designs to meet the specifications, implementation of the design and final testing of the implementation for any deviations from specification and for robustness.Working within a project team to deliver the overall project objectives within committed time, to cost and with good quality.Hours: Full time, 37.5 hours per week, Monday to FridayPay rate: £33.49 per hourRequirements for the role:Have a minimum of 4 years' experience in electronics design and development.Deliver clearly documented and accurate designs.Identify opportunities in product development that will provide benefits to the customer.Take part in activities that are necessary for the R&D department to develop. E.g. Represent the Company in the wider community.Identify and suggest ways of improving the discipline working practices and implement the changes.Have knowledge of and be able to interpret compliance standards.Perform research in areas defined by oneself or others.Maintain legacy products and providing quick solutions on issues found in such products.Have a good understanding of modern manufacturing techniques for volume production.Have an appreciation of full design lifecycles from cradle to grave.Desired Skills: A proven engineering background in Electronics product design (Best practice in circuit design, schematic entry, prototyping and circuit simulation, multilayer PCB layout techniques).Precision analogue design, op-amps, high resolution ADC etc.Digital design, FLASH memory, microprocessor specification and integration etc.Designing and testing for EMC.Experience in high speed serial communications e.g. Ethernet.Experience of identification and resolution of product design issues.Have extensive knowledge of specific areas of the product development or technology and actively assist other engineers in areas of expertise.Have an awareness of market, application and customer needs and should offer creative and innovative input regarding new products, services or features and application of new technologies.Have detailed knowledge of, and the ability to implement using complex techniques Interpretation of compliance standards e.g. EMC; Safety.Extensive experience in a new product development environment, with a proven track record of successful delivery to customers.Power supply design switch mode and linear.Working within an ISO9000 approved process or similar.Working in multi-disciplined design teams in some cases split across countries.Lead small teams of hardware engineers developing products.Design for manufacture and testability.High speed digital design, use of Programmable logic and full gate simulation.Use of quality processes and tools (e.g. DFMEA/FTA).Experience of New Product Introduction into local or remote manufacturing facilities.Design and specification of Human Machine Interfaces.Appropriate reuse of existing designs.If you would like to know more, click apply TODAY!
        Are you an expereineced Electronic Hardware Design Engineer? Are you looking for an exciting opportunity within one of the UKs largest electric brands? Are you looking for more autonomy to propose/develop solutions?If you have answered yes to the questions above, we have a fantastic role for you. As an Electronics Hardware, Senior Design Engineer you will be expected to take responsibility for all technical activities of design to develop new or maintain current Offers. This involves analysing requirements to derive specifications, developing designs to meet the specifications, implementation of the design and final testing of the implementation for any deviations from specification and for robustness.Working within a project team to deliver the overall project objectives within committed time, to cost and with good quality.Hours: Full time, 37.5 hours per week, Monday to FridayPay rate: £33.49 per hourRequirements for the role:Have a minimum of 4 years' experience in electronics design and development.Deliver clearly documented and accurate designs.Identify opportunities in product development that will provide benefits to the customer.Take part in activities that are necessary for the R&D department to develop. E.g. Represent the Company in the wider community.Identify and suggest ways of improving the discipline working practices and implement the changes.Have knowledge of and be able to interpret compliance standards.Perform research in areas defined by oneself or others.Maintain legacy products and providing quick solutions on issues found in such products.Have a good understanding of modern manufacturing techniques for volume production.Have an appreciation of full design lifecycles from cradle to grave.Desired Skills: A proven engineering background in Electronics product design (Best practice in circuit design, schematic entry, prototyping and circuit simulation, multilayer PCB layout techniques).Precision analogue design, op-amps, high resolution ADC etc.Digital design, FLASH memory, microprocessor specification and integration etc.Designing and testing for EMC.Experience in high speed serial communications e.g. Ethernet.Experience of identification and resolution of product design issues.Have extensive knowledge of specific areas of the product development or technology and actively assist other engineers in areas of expertise.Have an awareness of market, application and customer needs and should offer creative and innovative input regarding new products, services or features and application of new technologies.Have detailed knowledge of, and the ability to implement using complex techniques Interpretation of compliance standards e.g. EMC; Safety.Extensive experience in a new product development environment, with a proven track record of successful delivery to customers.Power supply design switch mode and linear.Working within an ISO9000 approved process or similar.Working in multi-disciplined design teams in some cases split across countries.Lead small teams of hardware engineers developing products.Design for manufacture and testability.High speed digital design, use of Programmable logic and full gate simulation.Use of quality processes and tools (e.g. DFMEA/FTA).Experience of New Product Introduction into local or remote manufacturing facilities.Design and specification of Human Machine Interfaces.Appropriate reuse of existing designs.If you would like to know more, click apply TODAY!
        • willenhall, west midlands
        • permanent
        • £34,500 per year
        • full-time
        Electrical Maintenance EngineerThe RoleAs an Electrical Maintenance Engineer, you will support our operations teams by performing necessary breakdown repairs, leading preventative maintenance activity and facilitating the promotion of engineering solutions for process improvement to ensure process availability and productivity are optimised.The role of the Maintenance Engineers is to effectively maintain all process and auxiliary equipment across the Steelpark with an aim to improve up time while reducing costs. All maintenance engineers will be expected to work a 3 shift- rotating pattern (Monday to Friday) with cover at the weekend when needed.Duties and responsibilities within the role include but are not limited to: Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost.Adhere to the preventative maintenance programmes to ensure that unplanned downtime is avoided.Through utilisation of the SHIRE (PM) system ensure engineering spares and inventory on site are managed within budget constraints and equipment downtime is minimised.Deliver training to operators in order they are able to understand and implement basic maintenance activities facilitating optimum productivity.Procure and manage contract resource to ensure prompt and cost effective recovery from breakdown.Facilitate optimal performance by working flexibly within the team and the context of the site, undertaking maintenance at short notice.Ensure that own and team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in manner which fully complies with Health & Safety, quality, environmental and corporate policies.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.To provide a source of expertise in programmable/configurable devices (instrumentation, PLCs, drives etc.)The CandidateThe ideal candidate must be qualified to ONC, HND or City & Guilds Mechanical or ONC, HND or City & Guilds Electrical.Applicants will have demonstrable experience of a relevant engineering discipline, continuous improvement processes, preventative maintenance techniques and dealing with contractors. Experience of first stage fault finding, PLCs, drives and AC/DC controllers is also desirable. Alternatively, in depth knowledge of pneumatics, hydraulics, welding and first stage mechanical fault finding.You will have the ability to demonstrate excellent communication and organisational skills and be computer literate. The ability to work without close supervision, yet under pressure and to tight timescales is essential.The BenefitsOur Client offers their employees significant benefits packages. For this role, you will benefit from:A market competitive salary35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) We also have an extensive list of lifestyle benefits including free on site parking at all of our sites, an employee assistance programme as well as discounts with local and national retailers and services. Employee discount scheme for companies including Vodafone, Nissan, Jaguar Land Rover and also various local services Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Electrical Maintenance EngineerThe RoleAs an Electrical Maintenance Engineer, you will support our operations teams by performing necessary breakdown repairs, leading preventative maintenance activity and facilitating the promotion of engineering solutions for process improvement to ensure process availability and productivity are optimised.The role of the Maintenance Engineers is to effectively maintain all process and auxiliary equipment across the Steelpark with an aim to improve up time while reducing costs. All maintenance engineers will be expected to work a 3 shift- rotating pattern (Monday to Friday) with cover at the weekend when needed.Duties and responsibilities within the role include but are not limited to: Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost.Adhere to the preventative maintenance programmes to ensure that unplanned downtime is avoided.Through utilisation of the SHIRE (PM) system ensure engineering spares and inventory on site are managed within budget constraints and equipment downtime is minimised.Deliver training to operators in order they are able to understand and implement basic maintenance activities facilitating optimum productivity.Procure and manage contract resource to ensure prompt and cost effective recovery from breakdown.Facilitate optimal performance by working flexibly within the team and the context of the site, undertaking maintenance at short notice.Ensure that own and team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in manner which fully complies with Health & Safety, quality, environmental and corporate policies.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.To provide a source of expertise in programmable/configurable devices (instrumentation, PLCs, drives etc.)The CandidateThe ideal candidate must be qualified to ONC, HND or City & Guilds Mechanical or ONC, HND or City & Guilds Electrical.Applicants will have demonstrable experience of a relevant engineering discipline, continuous improvement processes, preventative maintenance techniques and dealing with contractors. Experience of first stage fault finding, PLCs, drives and AC/DC controllers is also desirable. Alternatively, in depth knowledge of pneumatics, hydraulics, welding and first stage mechanical fault finding.You will have the ability to demonstrate excellent communication and organisational skills and be computer literate. The ability to work without close supervision, yet under pressure and to tight timescales is essential.The BenefitsOur Client offers their employees significant benefits packages. For this role, you will benefit from:A market competitive salary35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) We also have an extensive list of lifestyle benefits including free on site parking at all of our sites, an employee assistance programme as well as discounts with local and national retailers and services. Employee discount scheme for companies including Vodafone, Nissan, Jaguar Land Rover and also various local services Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • bedfordshire, east of england
        • permanent
        • £19,344 - £32,000 per year
        • full-time
        Are you looking for a career with a growing, developing and successful company? Then we have the job for you! Due to a recent expansion and a further expansion to come, we are looking to bolster their team. We are looking to strengthen the team with up to 6 Water Hygiene Engineers - experienced and trainee. So, if this is you and you have experience in: taking water samplescompleting temperature monitoringtaking tank inspections and closed system analysisflushing systems changing of liquids cleaning and chlorinating the water tanksAnd if you are happy travelling throughout the UK to premisis such as: hospitalsbreweries factories warehouses Then you will need to have:experience in this field to be considered for the experience rolea desire to become an experience WTE for the trainee rolea full driver's licence BE ABLE TO WORK AWAY FROM HOME FOR AT LEAST 2 NIGHTS A WEEK You will be starting asap you will be on the road with a new van in no time or if you are a trainee you will be buddied with an experienced member of staff until you are ready to go it alone and then you will be given your own van and tools and off to go! Apply and we will call you back with more information and the benefits of working for this amazing company! Randstad Business Support acts as an employment business when supplying temporary staff and as an employment agency when introducing candidates for permanent employment with a client. Randstad Business Support is an equal opportunities employer and decisions are made on merits alone.
        Are you looking for a career with a growing, developing and successful company? Then we have the job for you! Due to a recent expansion and a further expansion to come, we are looking to bolster their team. We are looking to strengthen the team with up to 6 Water Hygiene Engineers - experienced and trainee. So, if this is you and you have experience in: taking water samplescompleting temperature monitoringtaking tank inspections and closed system analysisflushing systems changing of liquids cleaning and chlorinating the water tanksAnd if you are happy travelling throughout the UK to premisis such as: hospitalsbreweries factories warehouses Then you will need to have:experience in this field to be considered for the experience rolea desire to become an experience WTE for the trainee rolea full driver's licence BE ABLE TO WORK AWAY FROM HOME FOR AT LEAST 2 NIGHTS A WEEK You will be starting asap you will be on the road with a new van in no time or if you are a trainee you will be buddied with an experienced member of staff until you are ready to go it alone and then you will be given your own van and tools and off to go! Apply and we will call you back with more information and the benefits of working for this amazing company! Randstad Business Support acts as an employment business when supplying temporary staff and as an employment agency when introducing candidates for permanent employment with a client. Randstad Business Support is an equal opportunities employer and decisions are made on merits alone.
        • peterborough, east of england
        • contract
        • £24.00 - £35.00 per hour
        • full-time
        Maintenance EngineerAre you a Maintenance Engineer currently in the market for a new role? Do you want to be in the best place to receive all of the latest roles Randstad have to offer?Randstad are the number 1 recruiter in the world and has access to thousands of exclusive vacancies everyday. I am currently speaking to Engineers in the West Midlands area for current and future positions, some with ASAP start dates. Whether your a graduate or highly experienced...If you posses any of the skills below, please apply:Qualified time served apprenticeship trained Maintenance Engineer with an Electrical bias and strong mechanical skillsDelivering sustainable improvements across multiple areas including Safety, PPM, Waste Reduction and Plant performance within an FMCG or manufacturing environment.To work at a competent level of expertise with PLC's, robotics within machining hydraulic, pneumatic, electrical systems and process control software.Randstad are here to help you as best we can during this epidemic, one of the ways we can help is by giving you the best chance at finding your dream role in the current and not to distant future. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Maintenance EngineerAre you a Maintenance Engineer currently in the market for a new role? Do you want to be in the best place to receive all of the latest roles Randstad have to offer?Randstad are the number 1 recruiter in the world and has access to thousands of exclusive vacancies everyday. I am currently speaking to Engineers in the West Midlands area for current and future positions, some with ASAP start dates. Whether your a graduate or highly experienced...If you posses any of the skills below, please apply:Qualified time served apprenticeship trained Maintenance Engineer with an Electrical bias and strong mechanical skillsDelivering sustainable improvements across multiple areas including Safety, PPM, Waste Reduction and Plant performance within an FMCG or manufacturing environment.To work at a competent level of expertise with PLC's, robotics within machining hydraulic, pneumatic, electrical systems and process control software.Randstad are here to help you as best we can during this epidemic, one of the ways we can help is by giving you the best chance at finding your dream role in the current and not to distant future. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • southampton, south east
        • contract
        • £320 - £350 per day
        • full-time
        Mechanical Design Engineer - Southampton£320 - 350 per dayMechanical Design Engineer required to join a growing team of mechanical engineers within a large water treatment framework.Duties will include:Ascertaining Clients' requirements through reference to their specification documents and visiting sites with their nominated personnel.A key requirement is the ability to determine the actual operational requirement and propose appropriate solutionsWorking alongside the Design Manager and delivery staff to ensure scheme designs are value engineered and adhere to client specifications whilst retaining appropriate levels of operational security and full compliance with all relevant Health, Safety and Environmental legislationPromoting innovation and challenge parties involved to ensure cost effectiveness in all design activitiesProviding outline and detailed mechanical engineering outputs from inception to completion of schemes, including working alongside site installation / construction personnelEnsuring design work is completed to agreed programmes, financial budgets and KPI'sLiaising with clients' engineering staff to ensure designs are approved in accordance with required timescalesRequired:HNC Minimum and previous waste or clean water experience.For further information please contact Susannah on 01622357230 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Mechanical Design Engineer - Southampton£320 - 350 per dayMechanical Design Engineer required to join a growing team of mechanical engineers within a large water treatment framework.Duties will include:Ascertaining Clients' requirements through reference to their specification documents and visiting sites with their nominated personnel.A key requirement is the ability to determine the actual operational requirement and propose appropriate solutionsWorking alongside the Design Manager and delivery staff to ensure scheme designs are value engineered and adhere to client specifications whilst retaining appropriate levels of operational security and full compliance with all relevant Health, Safety and Environmental legislationPromoting innovation and challenge parties involved to ensure cost effectiveness in all design activitiesProviding outline and detailed mechanical engineering outputs from inception to completion of schemes, including working alongside site installation / construction personnelEnsuring design work is completed to agreed programmes, financial budgets and KPI'sLiaising with clients' engineering staff to ensure designs are approved in accordance with required timescalesRequired:HNC Minimum and previous waste or clean water experience.For further information please contact Susannah on 01622357230 Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • port talbot, wales
        • contract
        • £20,000 - £21,000 per year
        • full-time
        Randstad are currently recruiting for a Stores Team member to come on board on a rolling contract basis with Tata Steel in Port-Talbot and the role is working a 40 hour week over 5 days. PURPOSE OF JOB:To receive, identify, locate, issue, stock take and deliver consumables, lubricants, engineering spares and other materials either manually or by means of mechanical material handling equipment or vehicles, as required. Action associated documentation and update computer systems. KNOWLEDGE AND EXPERIENCE:The job holder must have a thorough understanding of Stores and Spares operationsHave the ability to organise, in order to provide agreed service levels to plantPreferred understanding and working knowledge of the WM & IM processes within SAP and relevant Stores based PC systemsEducated to minimum GCSE standard (or equivalent). NVQ in storekeeping would be an advantageCommunication skills and the ability to liaise in a professional manner with Engineers, Tata personnel and external suppliers is essentialMust have a logical approach to resolving queriesFull clean driving licence is preferable and undertake the relevant training for Fork Lifts, Cranes, Internal HGVs, Slinging, Lubrication handling and distributionKnowledge of Tata working systems, such as Health and Safety requirements, CDM Regulations, Safe Working Practices, safety contacts, topic audits, Quality Assurance documentation, British Standards and Statutory requirementsIf this is something you are interested in, please click the link to apply! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Randstad are currently recruiting for a Stores Team member to come on board on a rolling contract basis with Tata Steel in Port-Talbot and the role is working a 40 hour week over 5 days. PURPOSE OF JOB:To receive, identify, locate, issue, stock take and deliver consumables, lubricants, engineering spares and other materials either manually or by means of mechanical material handling equipment or vehicles, as required. Action associated documentation and update computer systems. KNOWLEDGE AND EXPERIENCE:The job holder must have a thorough understanding of Stores and Spares operationsHave the ability to organise, in order to provide agreed service levels to plantPreferred understanding and working knowledge of the WM & IM processes within SAP and relevant Stores based PC systemsEducated to minimum GCSE standard (or equivalent). NVQ in storekeeping would be an advantageCommunication skills and the ability to liaise in a professional manner with Engineers, Tata personnel and external suppliers is essentialMust have a logical approach to resolving queriesFull clean driving licence is preferable and undertake the relevant training for Fork Lifts, Cranes, Internal HGVs, Slinging, Lubrication handling and distributionKnowledge of Tata working systems, such as Health and Safety requirements, CDM Regulations, Safe Working Practices, safety contacts, topic audits, Quality Assurance documentation, British Standards and Statutory requirementsIf this is something you are interested in, please click the link to apply! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • peterborough, east of england
        • contract
        • £16.24 per hour
        • full-time
        Our client is an Engineering Manufacturing Business based in Peterborough. They are now looking for an experienced Automation Engineer to join their team. The ideal candidate for this role will have experience working in a similar role currently. Job Responsibilities:Automation support and developmentTranslate customers functional requirements into technical design elements Design, development, validation and deployment of critical automation featuresWorking directly on complex technical problems to identify root causes and develop solutions in a timely manner.Collaborate with test cell operators and development engineers to identify improvement opportunities and resolve issuesTroubleshoot automation coding / scripting and system integration issues efficiently and effectivelyResearch new technology, architectures, frameworks, and products to be incorporated into the current or future automation suiteBasic Qualifications and requirements:Bachelor's degree (or equivalent) in an accredited Computer Engineering, Electrical Engineering or Mechanical engineering3+ years of relevant experience in engine/power system development/testing or test scripting/automation development in a lab environment or similarThe ideal candidate will have:Electronic / digital system integration experienceExperience in applying automation to test facilities/labsExperience with test software FEV Morphee, AVL Puma, Vector CANape/CANalyzer, dSpace control-desk/automation-desk, ETAS Inca, DSG DaTAQ Pro, NI Labview/Veristand or similar…Strong analytical and problem-solving skillsGood communication, interpersonal and collaboration skillsTrue passion for automation and methodical engineering practices If this sounds like the ideal position for you, please apply now! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Our client is an Engineering Manufacturing Business based in Peterborough. They are now looking for an experienced Automation Engineer to join their team. The ideal candidate for this role will have experience working in a similar role currently. Job Responsibilities:Automation support and developmentTranslate customers functional requirements into technical design elements Design, development, validation and deployment of critical automation featuresWorking directly on complex technical problems to identify root causes and develop solutions in a timely manner.Collaborate with test cell operators and development engineers to identify improvement opportunities and resolve issuesTroubleshoot automation coding / scripting and system integration issues efficiently and effectivelyResearch new technology, architectures, frameworks, and products to be incorporated into the current or future automation suiteBasic Qualifications and requirements:Bachelor's degree (or equivalent) in an accredited Computer Engineering, Electrical Engineering or Mechanical engineering3+ years of relevant experience in engine/power system development/testing or test scripting/automation development in a lab environment or similarThe ideal candidate will have:Electronic / digital system integration experienceExperience in applying automation to test facilities/labsExperience with test software FEV Morphee, AVL Puma, Vector CANape/CANalyzer, dSpace control-desk/automation-desk, ETAS Inca, DSG DaTAQ Pro, NI Labview/Veristand or similar…Strong analytical and problem-solving skillsGood communication, interpersonal and collaboration skillsTrue passion for automation and methodical engineering practices If this sounds like the ideal position for you, please apply now! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • peterborough, east of england
        • permanent
        • negotiable
        • full-time
        Automation EngineerRandstad is very excited to be recruiting for an Automation Engineer on a permanent basis to join an industry leading automation company who design and supply process control systems to the food industry.Through this role, the successful candidate will have an excellent opportunity to take part in, and have significant responsibility for leading turnkey projects, including time, cost and quality responsibilities.You will play a key role in the design and coding of some PLC/SCADA control system software for the Food/FMCG industry. The role:Leading turnkey projects, including time, cost and quality responsibilitiesLeading other multi-disciplined engineers on your projectsCustomer interface regarding all project matters, including commercial aspectsProduction of necessary documentation (FDS, Manuals etc.)Design and coding of some PLC/SCADA control system software (Rockwell and Siemens)Testing and Acceptance testing with CustomersInvolvement with commissioning of systems on siteModifications to hardware and panels on site (24VDC, 230VAC, 415VAC)Training of Customer personnelProvision of Customer support services, including 24/7 out of hours supportSupport/ Essential experience:Technical/Vocational diploma or degree in electrical or automation engineering or equivalent.Have demonstrable project management leadership experienceKnowledge of design and coding of PLC/SCADA control system software (preferably Rockwell and Siemens TIA).The role will require willingness to travel throughout the UK and Worldwide approx. 30-40% annually.This is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Automation EngineerRandstad is very excited to be recruiting for an Automation Engineer on a permanent basis to join an industry leading automation company who design and supply process control systems to the food industry.Through this role, the successful candidate will have an excellent opportunity to take part in, and have significant responsibility for leading turnkey projects, including time, cost and quality responsibilities.You will play a key role in the design and coding of some PLC/SCADA control system software for the Food/FMCG industry. The role:Leading turnkey projects, including time, cost and quality responsibilitiesLeading other multi-disciplined engineers on your projectsCustomer interface regarding all project matters, including commercial aspectsProduction of necessary documentation (FDS, Manuals etc.)Design and coding of some PLC/SCADA control system software (Rockwell and Siemens)Testing and Acceptance testing with CustomersInvolvement with commissioning of systems on siteModifications to hardware and panels on site (24VDC, 230VAC, 415VAC)Training of Customer personnelProvision of Customer support services, including 24/7 out of hours supportSupport/ Essential experience:Technical/Vocational diploma or degree in electrical or automation engineering or equivalent.Have demonstrable project management leadership experienceKnowledge of design and coding of PLC/SCADA control system software (preferably Rockwell and Siemens TIA).The role will require willingness to travel throughout the UK and Worldwide approx. 30-40% annually.This is an awesome opportunity to be part of a leading manufacturing business which offers an interesting, varied and exciting workload coupled with a motivated and passionate culture. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • plymouth, south west
        • permanent
        • dependent on experience
        • full-time
        Electronics EngineerPlymouthPermanentRandstad Engineering have partnered with a market leading client who specialise in the design and manufacture of high cost, low volume capital equipment for the defence industries. They offer a superb working environment and culture thats second to none, and offer the chance progress within the company.They are currently seeking an experienced Electronics Engineer to assist with the design and development of electrical and electronic hardware and embedded software.Key Responsibilities:Take a leading role in multi-discipline technical projects and provide guidance to other engineers during development project phasesDesign and develop electrical and electronic systems for compliance with customer specificationsProve the viability of new concepts from first principles - including circuit modelling, calculations and lab prototype workProduce and maintain block diagrams, wiring, cabling and PCB schematicsWork with customers to assist integration, commissioning and problem resolution activitiesLiaise with the production team to ensure that all data related to the electronic and electrical design of a system is available for procurement in a timely manner in accordance with the overall project plan.Identify and mitigate risks within the design and development processAssist project management, senior management and production with the successful running and administration of engineering projects, including the identification and estimation of work packages.Key Skills and Experience:A degree in a related engineering disciplineExperience of combined electronic, electrical and software designGood all-round practical understanding of electrical and electronics systemsUnderstanding of the integration of electronics and software into complete systems, including mechanical interactionDesirable but not essential:Embedded software design experience using ARM and the Keil environmentExperience of system mathematical modelling and simulation is an advantageKnowledge of EMC qualification testingPlease get in touch immediately to discuss further Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Electronics EngineerPlymouthPermanentRandstad Engineering have partnered with a market leading client who specialise in the design and manufacture of high cost, low volume capital equipment for the defence industries. They offer a superb working environment and culture thats second to none, and offer the chance progress within the company.They are currently seeking an experienced Electronics Engineer to assist with the design and development of electrical and electronic hardware and embedded software.Key Responsibilities:Take a leading role in multi-discipline technical projects and provide guidance to other engineers during development project phasesDesign and develop electrical and electronic systems for compliance with customer specificationsProve the viability of new concepts from first principles - including circuit modelling, calculations and lab prototype workProduce and maintain block diagrams, wiring, cabling and PCB schematicsWork with customers to assist integration, commissioning and problem resolution activitiesLiaise with the production team to ensure that all data related to the electronic and electrical design of a system is available for procurement in a timely manner in accordance with the overall project plan.Identify and mitigate risks within the design and development processAssist project management, senior management and production with the successful running and administration of engineering projects, including the identification and estimation of work packages.Key Skills and Experience:A degree in a related engineering disciplineExperience of combined electronic, electrical and software designGood all-round practical understanding of electrical and electronics systemsUnderstanding of the integration of electronics and software into complete systems, including mechanical interactionDesirable but not essential:Embedded software design experience using ARM and the Keil environmentExperience of system mathematical modelling and simulation is an advantageKnowledge of EMC qualification testingPlease get in touch immediately to discuss further Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • port talbot, wales
        • contract
        • £45,000 - £55,000, per year, 35 Days Holiday, Annual Pay Increase
        • full-time
        Temporary Works Coordinator (Designated Individual) The RoleTata Steel Strip Products UK is seeking a Temporary Works Designated Individual to join it's Project Engineering and Delivery team and help deliver an exciting and diverse portfolio of projects. Our projects are both strategically important to the UK Strip Steel business and in many cases high value and technologically complex.This role requires a excellent understanding of temporary works processes, designs and procedures, and how they are applied in use. You should be a problem solver who can work with a large number of stakeholders to agree solutions and help teams achieve a common goal. You should also feel comfortable with data and basic data management tools, to be able to quickly share updates on progress. ResponsibilitiesMaintain high standards of personal and team Health and Safety ensuring that:The working environment is organised, respectful, inclusive, healthy and appropriate for the work being undertakenOngoing engagement takes place with direct, indirect and contractor teams Manage input from multiple projects in relation to the TW requirements, competencies, training and on-site delivery.Effectively communicates and collaborates openly with vendors, internal management and other engineers/managers in the Projects and Design Engineering teamCollaborates in a cross-functional team environment to drive initiativesCoordinates resources, provide clear direction and timelines for deliverables, and delegate tasks where appropriateEffectively handle multiple priorities to meet all objectives and deadlinesCompetencies, Skills and Experience RequiredKey RequirementChartered civil or structural engineer with minimum of 8 years' experience of all types of temporary works construction processes on site, or:Educated to Degree level (or equivalent) in civil & or structural engineering with a minimum of 10 years' experience of all types of temporary works construction process on site, or:Educated to HND / HNC (or equivalent) in civil & or structural engineering with a min of 15 years' experience of all types of temporary works construction processes on siteReceived up to date formal temporary works trainingIn depth knowledge of BS 5975:2008+A1:2018PAS 8811:2017 & PAS 8812:2016Will need to acquire an in depth knowledge of TSSP UK's Temporary Works Policy & ProceduresMaintain, audit and verify all TW Permits/Certificates on TSSP UK's Electronic Temporary Works registerNEBOSH Qualified to National General Certificate levelEngineering knowledge and understanding (ability to read & understand technical drawings and specifications)Experience of design principles, current codes of practicesExperience in a management and or leadership roleA demonstrated ability to act autonomously with regard to decision making within their area of expertise (ability to identify & agree competencies of proposed TWC's, ATWC's, TWS's, TWD's & TWDC's)Ability to verify / audit contracting companies temporary work proceduresHave a sound knowledge of Health, Safety and Welfare legislation, hazards and safe systems of work. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Temporary Works Coordinator (Designated Individual) The RoleTata Steel Strip Products UK is seeking a Temporary Works Designated Individual to join it's Project Engineering and Delivery team and help deliver an exciting and diverse portfolio of projects. Our projects are both strategically important to the UK Strip Steel business and in many cases high value and technologically complex.This role requires a excellent understanding of temporary works processes, designs and procedures, and how they are applied in use. You should be a problem solver who can work with a large number of stakeholders to agree solutions and help teams achieve a common goal. You should also feel comfortable with data and basic data management tools, to be able to quickly share updates on progress. ResponsibilitiesMaintain high standards of personal and team Health and Safety ensuring that:The working environment is organised, respectful, inclusive, healthy and appropriate for the work being undertakenOngoing engagement takes place with direct, indirect and contractor teams Manage input from multiple projects in relation to the TW requirements, competencies, training and on-site delivery.Effectively communicates and collaborates openly with vendors, internal management and other engineers/managers in the Projects and Design Engineering teamCollaborates in a cross-functional team environment to drive initiativesCoordinates resources, provide clear direction and timelines for deliverables, and delegate tasks where appropriateEffectively handle multiple priorities to meet all objectives and deadlinesCompetencies, Skills and Experience RequiredKey RequirementChartered civil or structural engineer with minimum of 8 years' experience of all types of temporary works construction processes on site, or:Educated to Degree level (or equivalent) in civil & or structural engineering with a minimum of 10 years' experience of all types of temporary works construction process on site, or:Educated to HND / HNC (or equivalent) in civil & or structural engineering with a min of 15 years' experience of all types of temporary works construction processes on siteReceived up to date formal temporary works trainingIn depth knowledge of BS 5975:2008+A1:2018PAS 8811:2017 & PAS 8812:2016Will need to acquire an in depth knowledge of TSSP UK's Temporary Works Policy & ProceduresMaintain, audit and verify all