Thank you for subscribing to your personalised job alerts.

    188 jobs found for engineering

    filter2
    clear all
      • desford, east midlands
      • contract
      • £20.30 - £27.27 per hour
      • randstad cpe
      Job Duties/Responsibilities may include, but are not limited to: - Trusted advisor to the Product Support and Logistics Division for the facility's leadership team located at our Skinningrove location regarding human resource and talent management activities- Interact with and counsel all levels of management and hourly employees to assist and resolve a wide variety of personnel, wage/salary and benefit-related issues- Support and consult with leaders to drive employee experience- Coach leaders and employees on career development planning and opportunities, including support for learning and development, mentoring, identification of skills gaps, etc.- Production recruiting and onboarding support- Identify opportunities for Lean principles- Administer all HR compliance related processes- Support Employee Insights data analysis and communication- Advise employees and leaders on our new Workday System roll out- Interfacing with Corporate Human Resources, Total Rewards and Payroll personnel to assist in the administration and support of employee issues within HR areas- Support employee relations matters including fact finding, issue resolution, and disciplinary process- Support processes such as employee absences, long-term sick cases, and coordination with Occupational Health. - Provide temporary remote support for TUPE at Ireland facility. - Partner with other HR professionals in the Division as well as in the UK for knowledge sharing and process implementation Required Qualifications:- College or university degree or equivalent experience- 2 or more years of human resources job-related experienceTop Candidates Will Also Have: - Possess a strong understanding of HR policies/procedures- Must have the proven ability to maintain confidentiality- Requires an awareness in many areas of human resources, employee relations, benefits, compensation, and training with a working knowledge of operations- Demonstrated proficiency in internal investigations Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Job Duties/Responsibilities may include, but are not limited to: - Trusted advisor to the Product Support and Logistics Division for the facility's leadership team located at our Skinningrove location regarding human resource and talent management activities- Interact with and counsel all levels of management and hourly employees to assist and resolve a wide variety of personnel, wage/salary and benefit-related issues- Support and consult with leaders to drive employee experience- Coach leaders and employees on career development planning and opportunities, including support for learning and development, mentoring, identification of skills gaps, etc.- Production recruiting and onboarding support- Identify opportunities for Lean principles- Administer all HR compliance related processes- Support Employee Insights data analysis and communication- Advise employees and leaders on our new Workday System roll out- Interfacing with Corporate Human Resources, Total Rewards and Payroll personnel to assist in the administration and support of employee issues within HR areas- Support employee relations matters including fact finding, issue resolution, and disciplinary process- Support processes such as employee absences, long-term sick cases, and coordination with Occupational Health. - Provide temporary remote support for TUPE at Ireland facility. - Partner with other HR professionals in the Division as well as in the UK for knowledge sharing and process implementation Required Qualifications:- College or university degree or equivalent experience- 2 or more years of human resources job-related experienceTop Candidates Will Also Have: - Possess a strong understanding of HR policies/procedures- Must have the proven ability to maintain confidentiality- Requires an awareness in many areas of human resources, employee relations, benefits, compensation, and training with a working knowledge of operations- Demonstrated proficiency in internal investigations Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • malta island, international
      • contract
      • competitive
      • qualitair
      Our client in Malta is looking for Sheet Metal workers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please follow this link to apply Level 1 https://app.staffnow.aero/platform/sharing/offers/LUFOM7PH
      Our client in Malta is looking for Sheet Metal workers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please follow this link to apply Level 1 https://app.staffnow.aero/platform/sharing/offers/LUFOM7PH
      • malta island, international
      • contract
      • competitive
      • qualitair
      Our client in Malta is looking for B2 licenced Engineers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please see links for application below A330 https://app.staffnow.aero/platform/sharing/offers/LUFH9LWCA350 https://app.staffnow.aero/platform/sharing/offers/LUFEBHY4
      Our client in Malta is looking for B2 licenced Engineers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please see links for application below A330 https://app.staffnow.aero/platform/sharing/offers/LUFH9LWCA350 https://app.staffnow.aero/platform/sharing/offers/LUFEBHY4
      • port talbot, wales
      • contract
      • £13.43 per hour
      • randstad cpe
      Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Are you an experienced fitter looking for a new and exciting opportunity? Do you live within a commutable distance of Port Talbot? This is a great opportunity so don't miss out!The RoleThe job holder will be responsible for mechanical maintenance, refurbishment and repair of mechanical equipment within the Manufacturing Engineering function for support of process lines. Role responsibilities will include, but not be limited to the following:Health, Safety and Environmental performance adhering to the works IMS procedures and PPE instructions / procedures and facilitating the team safety meetings.Undertake safe operation of equipment and machines within the Manufacturing Engineering workshops.Repair mechanical items to a high standard from existing drawings to the expected delivery period.Assist with development of designs for manufacture of process line and safety improvements.Undertake repairs and refurbishments of existing equipment.Take an active role in CI, maintaining and improving safety and housekeeping standards within the Manufacturing Engineering Workshops.Undertake Zone Safety audits at a given frequency as per Safety Sub Plan.Undertake Risk assessments and LOLERs for activities to be undertaken.The candidate must be time served fitter.He/she must have good communications skills. The candidate must be able to work as part of a multi-disciplined team. He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not.If you would like to apply for this position you can either submit your CV to this advert or you can give me a call on my landline which is 01489 560132 (Ask for Connor) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • malta island, international
      • contract
      • competitive
      • qualitair
      Our client in Malta is looking for Avionics engineers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please follow this link to applyhttps://app.staffnow.aero/platform/sharing/offers/LUFCXC7S
      Our client in Malta is looking for Avionics engineers to join their team and start as soon as possible. Must have valid EU Passport or visaUp to date EWIS FT HFProof of experience (letter/log books)Basic training certificates Flights + daily accommodation allowance provided Please follow this link to applyhttps://app.staffnow.aero/platform/sharing/offers/LUFCXC7S
      • port talbot, wales
      • contract
      • £12.87 - £12.87, per hour, 35 Days Holiday, Annual Pay Rise
      • randstad cpe
      Trainee Engineer Randstad are currently recruiting for a Trainee Engineer to join TATA steel in Port Talbot. The position is initially for a period of 12 months, with a likely extension for the right person. The hourly rate for this engineering position is £12.87 per hour, working a 36.5 hour week. No previous experience is required for this role, all training will be provided. Tata Steel is one of the world's top ten steel producers. The combined group has an aggregate crude steel capacity of more than 28 million tonnes and approximately 80,000 employees across four continents. Tata Steel is part of the Tata Group, one of the largest, most diverse conglomerates in the world with businesses in the UK including Tata Steel, Jaguar Land Rover and Tetley Tea. The RoleTata Steel Strip Products UK have recently invested in Faro 3D Scanning equipment to compliment their existing Design tools. The purpose of this job is to provide a complete on site 3D scanning service to TSSP UK sites at Port Talbot and Llanwern. This service will be supporting the development of Capital Projects and both Plant and Maintenance Improvements complying with relevant standards and regulations. Principal AccountabilitiesProvide an on site 3D Scanning service of Major Assets using the Faro Focus or Faro Freestyle Scanning equipment. This will support the "Design Out" maintenance failures / weaknesses to meet ongoing maintenance and plant improvements.To liaise with external technical organisations, manufacturers and other Tata departments and Divisions on 3D Scanning matters.To be the face to face contact and provide support knowledge to the Works area regarding work to be undertaken utilising the 3D Scanning equipment. Requirements / Personal SpecificationGood presentation and interpersonal skills are a must.Qualified to at least ONC Engineering Standard (or equivalent)Ability to handle and organise workforce, to write technical reports and communicate effectively with all levels of personnel with whom he/she has dealings.Excellent active listening skills.Ability to use 3D Cad Modelling software, preferably Solidworks.Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Trainee Engineer Randstad are currently recruiting for a Trainee Engineer to join TATA steel in Port Talbot. The position is initially for a period of 12 months, with a likely extension for the right person. The hourly rate for this engineering position is £12.87 per hour, working a 36.5 hour week. No previous experience is required for this role, all training will be provided. Tata Steel is one of the world's top ten steel producers. The combined group has an aggregate crude steel capacity of more than 28 million tonnes and approximately 80,000 employees across four continents. Tata Steel is part of the Tata Group, one of the largest, most diverse conglomerates in the world with businesses in the UK including Tata Steel, Jaguar Land Rover and Tetley Tea. The RoleTata Steel Strip Products UK have recently invested in Faro 3D Scanning equipment to compliment their existing Design tools. The purpose of this job is to provide a complete on site 3D scanning service to TSSP UK sites at Port Talbot and Llanwern. This service will be supporting the development of Capital Projects and both Plant and Maintenance Improvements complying with relevant standards and regulations. Principal AccountabilitiesProvide an on site 3D Scanning service of Major Assets using the Faro Focus or Faro Freestyle Scanning equipment. This will support the "Design Out" maintenance failures / weaknesses to meet ongoing maintenance and plant improvements.To liaise with external technical organisations, manufacturers and other Tata departments and Divisions on 3D Scanning matters.To be the face to face contact and provide support knowledge to the Works area regarding work to be undertaken utilising the 3D Scanning equipment. Requirements / Personal SpecificationGood presentation and interpersonal skills are a must.Qualified to at least ONC Engineering Standard (or equivalent)Ability to handle and organise workforce, to write technical reports and communicate effectively with all levels of personnel with whom he/she has dealings.Excellent active listening skills.Ability to use 3D Cad Modelling software, preferably Solidworks.Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • clevedon, south west
      • contract
      • dependent on experience
      • randstad technologies
      Randstad are recruiting for a Senior Mechanical Development Engineer on a 12 month contract for a client based in Clevedon.Working under the direction of the Lead Engineer you will be responsible for the delivery of design solutions within a multi-discipline engineering team, supporting product development at Product Company, Clevedon Goals:To design and develop modules/sub-assemblies of new products in accordance with our client's Product Commercialisation Process (PCP) ensuring that the required reliability, quality and cost targets are metTo meet the Master Specification targets and ensure conformance to the relevant international, national and industry safety standardsTo verify that the designs meet the Master Specification and conform to the relevant design standards by calculation and/or testing as appropriateAccountable for the design and development of sub-assemblies of a product ensuring the specified quality and cost are achieved to the agreed project time scaleResponsible for the detailed documentation of the design (models, drawings, design data, BOM, test data) ensuring all relevant information is recorded in a timely manner and placed in the Technical Construction File (TCF) Qualifications & Experience:A good mechanically biased engineering degree (or other engineering qualification depending on experience)At least 5 years' post degree experience of working on whole system design and development in a Development environment.Ability to form and lead teams, coordinating actions to specific goalsExcellent problem solverIn-depth experience in product introductions and experience of managing elements of larger projects in support.Experience in directing the work, mentoring and supporting more junior engineers and designersA high level of 3D and 2D CAD skills (CATIA, Visio, AutoCAD and/or other drafting tools)FEA and CFD skills would be an advantageAn understanding of Piping and Instrumentation Diagrams (P&IDs) and system schematicsPositive attitude and ability to work under pressure to tight deadlinesUsed to working in a multidisciplinary environmentAbility to convey design intent concisely to all levels (upper management, Project Managers, Lead Engineers, peers and other members of the team) - to inform and to educate. This contract is inside IR35 and will pay up to £35/hour Umbrella rates.If you are interested, please make an application at your earliest convenience.Thank you are I look forward to hearing from you.Randstad Technologies is acting as an Employment Business in relation to this vacancy.
      Randstad are recruiting for a Senior Mechanical Development Engineer on a 12 month contract for a client based in Clevedon.Working under the direction of the Lead Engineer you will be responsible for the delivery of design solutions within a multi-discipline engineering team, supporting product development at Product Company, Clevedon Goals:To design and develop modules/sub-assemblies of new products in accordance with our client's Product Commercialisation Process (PCP) ensuring that the required reliability, quality and cost targets are metTo meet the Master Specification targets and ensure conformance to the relevant international, national and industry safety standardsTo verify that the designs meet the Master Specification and conform to the relevant design standards by calculation and/or testing as appropriateAccountable for the design and development of sub-assemblies of a product ensuring the specified quality and cost are achieved to the agreed project time scaleResponsible for the detailed documentation of the design (models, drawings, design data, BOM, test data) ensuring all relevant information is recorded in a timely manner and placed in the Technical Construction File (TCF) Qualifications & Experience:A good mechanically biased engineering degree (or other engineering qualification depending on experience)At least 5 years' post degree experience of working on whole system design and development in a Development environment.Ability to form and lead teams, coordinating actions to specific goalsExcellent problem solverIn-depth experience in product introductions and experience of managing elements of larger projects in support.Experience in directing the work, mentoring and supporting more junior engineers and designersA high level of 3D and 2D CAD skills (CATIA, Visio, AutoCAD and/or other drafting tools)FEA and CFD skills would be an advantageAn understanding of Piping and Instrumentation Diagrams (P&IDs) and system schematicsPositive attitude and ability to work under pressure to tight deadlinesUsed to working in a multidisciplinary environmentAbility to convey design intent concisely to all levels (upper management, Project Managers, Lead Engineers, peers and other members of the team) - to inform and to educate. This contract is inside IR35 and will pay up to £35/hour Umbrella rates.If you are interested, please make an application at your earliest convenience.Thank you are I look forward to hearing from you.Randstad Technologies is acting as an Employment Business in relation to this vacancy.
      • clevedon, south west
      • permanent
      • dependent on experience
      • randstad technologies
      Randstad are recruiting for a Senior Controls Engineer for a client based in Clevedon. This is a vacancy within the software team and you will work as part of a multi-disciplined team developing PLC-based control systems for exhaust gas management products. The successful candidate will: Develop the process control software for abatement systems, and therefore must be proficient in PLC programming.Experience of advanced architectures would be an advantage.Additionally you will develop Human Machine Interface (HMI) software that provides the visualisation of the equipment. This is developed using Microsoft Visual Studio (VB.net or C#), and while experience of this specific tool is not essential, you will have a demonstrated aptitude for programming in high-level languages.In addition to PLC expertise, a demonstrated aptitude for software design is essential. Specific experience of Microsoft Visual Studio (VB.net or C#) would be an advantage.As a Senior Controls Engineer you will also be expected to take a leading role within the projects to which you are assigned, working closely with project management to deliver high quality control solutions.It is essential that you work well in a team, interacting with fellow engineers and colleagues from around the world. Our client's business is global, and you must therefore be able to travel for occasional short-duration international assignments. You will have a minimum qualification of HND or equivalent, in electrical, electronic or automation engineering (or a related discipline) and have at least five years' experience working in a similar environment. This experience will preferably have been gained in the semiconductor industry, however relevant experience in other high technology sectors or the process industries will also be considered. The salary is up to £43,000, plus bonuses and benefits.If you are interested, please make an application at your earliest convenience. Thank you and I look forward to hearing from you. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Randstad are recruiting for a Senior Controls Engineer for a client based in Clevedon. This is a vacancy within the software team and you will work as part of a multi-disciplined team developing PLC-based control systems for exhaust gas management products. The successful candidate will: Develop the process control software for abatement systems, and therefore must be proficient in PLC programming.Experience of advanced architectures would be an advantage.Additionally you will develop Human Machine Interface (HMI) software that provides the visualisation of the equipment. This is developed using Microsoft Visual Studio (VB.net or C#), and while experience of this specific tool is not essential, you will have a demonstrated aptitude for programming in high-level languages.In addition to PLC expertise, a demonstrated aptitude for software design is essential. Specific experience of Microsoft Visual Studio (VB.net or C#) would be an advantage.As a Senior Controls Engineer you will also be expected to take a leading role within the projects to which you are assigned, working closely with project management to deliver high quality control solutions.It is essential that you work well in a team, interacting with fellow engineers and colleagues from around the world. Our client's business is global, and you must therefore be able to travel for occasional short-duration international assignments. You will have a minimum qualification of HND or equivalent, in electrical, electronic or automation engineering (or a related discipline) and have at least five years' experience working in a similar environment. This experience will preferably have been gained in the semiconductor industry, however relevant experience in other high technology sectors or the process industries will also be considered. The salary is up to £43,000, plus bonuses and benefits.If you are interested, please make an application at your earliest convenience. Thank you and I look forward to hearing from you. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • chippenham, south west
      • permanent
      • £33,000 - £33,500 per year
      • randstad technologies
      Maintenance Engineer Chippenham, Wiltshire Monday to Friday- 07:00- 15:30 or 08:00- 16:30£33,194 + Unlimited Overtime @ x1.5 & x2 + 33 Days Holiday + Benefits Full time, Permanent. My client, a globally recognised manufacturer, is looking for 3 maintenance engineers to join their day shift engineering team. The company has been established in the area for many decades and continues to offer a rewarding position, with skills based development, job security and earning potential. The successful candidate should be a multi-skilled maintenance engineer, with a mechanical or electrical bias. Due to the nature of the work, the role would be most suited to those with a mechanical bias, but electrically biased engineers are welcomed to apply. It is essential that you have worked in a production manufacturing environment, as a maintenance engineer, within a relevant industry. Candidates should hold a relevant qualification, with hands on experience to match. Working as part of the day shift engineering team, most of your work will cover planned maintenance, ensuring that machinery running and the reliability is of the desired level. You will be required to support the shift engineers in some cases, responding to breakdowns, fault finding and repairing. Other responsibilities will include: Supporting the apprenticeship program and guiding apprentices through their days, driving continuous improvement across site or any projects required, operate in line with H&S procedures. The Person: Experienced and multi skilled maintenance engineerMechanical Bias preferred (electrical bias welcomed to apply) Interest in automation and new technology Relevant qualification and hands on experience in a production manufacturing facility. The Role: 80% Planned maintenance and servicing of machinery 20% reactive and breakdown supportMonday to Friday- 07:00- 15:30Circa £33,000 + unlimited overtime Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Maintenance Engineer Chippenham, Wiltshire Monday to Friday- 07:00- 15:30 or 08:00- 16:30£33,194 + Unlimited Overtime @ x1.5 & x2 + 33 Days Holiday + Benefits Full time, Permanent. My client, a globally recognised manufacturer, is looking for 3 maintenance engineers to join their day shift engineering team. The company has been established in the area for many decades and continues to offer a rewarding position, with skills based development, job security and earning potential. The successful candidate should be a multi-skilled maintenance engineer, with a mechanical or electrical bias. Due to the nature of the work, the role would be most suited to those with a mechanical bias, but electrically biased engineers are welcomed to apply. It is essential that you have worked in a production manufacturing environment, as a maintenance engineer, within a relevant industry. Candidates should hold a relevant qualification, with hands on experience to match. Working as part of the day shift engineering team, most of your work will cover planned maintenance, ensuring that machinery running and the reliability is of the desired level. You will be required to support the shift engineers in some cases, responding to breakdowns, fault finding and repairing. Other responsibilities will include: Supporting the apprenticeship program and guiding apprentices through their days, driving continuous improvement across site or any projects required, operate in line with H&S procedures. The Person: Experienced and multi skilled maintenance engineerMechanical Bias preferred (electrical bias welcomed to apply) Interest in automation and new technology Relevant qualification and hands on experience in a production manufacturing facility. The Role: 80% Planned maintenance and servicing of machinery 20% reactive and breakdown supportMonday to Friday- 07:00- 15:30Circa £33,000 + unlimited overtime Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • canterbury, south east
      • permanent
      • competitive
      • randstad technologies
      OverviewMy client is looking for a Electronics Technical Support/Test Engineer to join their team.Main duties & responsibilitiesDelivering timely support to production including fault finding and documenting solutions.The design and manufacture of test jigs, fixtures and software for testing PCB's and electronic products.Generation of production documentation for electronics products.Liaison with PCB suppliers.Participating in the new product design process, including product test design and peer reviews.Writing of technical notes, reports, test specifications and explanations.Supporting design verification through testing and formal qualification.To undertake as required, customer and supplier visits by car. As such a full current driving licence is required.QualificationsElectronic Engineering Degree or equivalent.However, my client would be willing to consider technicians who can show practical, hands-on electronics experience and are looking to develop their careers.ExperiencePractical hands-on experience of electronics, including fault finding of electronic PCBs and equipment.Electronics test or production engineering and documentation an advantage.Electro-mechanical products an advantage.Skills & AbilitiesElectronics fault finding.Effective communicator both written and orally.Soldering and ability to make prototype circuits.Computer literate (MS Office packages).Advantageous to have Altium or similar PCB design software skills.Advantageous to have an understanding of embedded C and C++.Advantageous to have an understanding of application C++ and C#.SecurityDue to the nature of the work all candidates must be eligible to obtain security clearance to SC level. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      OverviewMy client is looking for a Electronics Technical Support/Test Engineer to join their team.Main duties & responsibilitiesDelivering timely support to production including fault finding and documenting solutions.The design and manufacture of test jigs, fixtures and software for testing PCB's and electronic products.Generation of production documentation for electronics products.Liaison with PCB suppliers.Participating in the new product design process, including product test design and peer reviews.Writing of technical notes, reports, test specifications and explanations.Supporting design verification through testing and formal qualification.To undertake as required, customer and supplier visits by car. As such a full current driving licence is required.QualificationsElectronic Engineering Degree or equivalent.However, my client would be willing to consider technicians who can show practical, hands-on electronics experience and are looking to develop their careers.ExperiencePractical hands-on experience of electronics, including fault finding of electronic PCBs and equipment.Electronics test or production engineering and documentation an advantage.Electro-mechanical products an advantage.Skills & AbilitiesElectronics fault finding.Effective communicator both written and orally.Soldering and ability to make prototype circuits.Computer literate (MS Office packages).Advantageous to have Altium or similar PCB design software skills.Advantageous to have an understanding of embedded C and C++.Advantageous to have an understanding of application C++ and C#.SecurityDue to the nature of the work all candidates must be eligible to obtain security clearance to SC level. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • hook, south east
      • permanent
      • £35,000 - £40,000 per year
      • randstad technologies
      Overview My client is currently looking for a Product Manager to join their team. The succesfull candidate will assist in the delivery of new products, from requirement specifications, to design and testing as well as in the support of existing products. Responsibilties: Manage product requirements along the lifecycle of the productBe the interface between customers and design engineering teamDevelop user guides for new productsDevelop product collateral for marketing and presentations to clients. Perform product demonstrations to clientsDevelop SKU matrix and manufacturing data about the product for the factory.Assist product managers in their day-to-day activities including management of product related documentation, development of business cases and market analysis, development of product roadmaps, etcExperience and Qualifications Degree in Electrical Engineering, Computer Science, mechanical engineering or similar with 2 - 5 years of working experience Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Overview My client is currently looking for a Product Manager to join their team. The succesfull candidate will assist in the delivery of new products, from requirement specifications, to design and testing as well as in the support of existing products. Responsibilties: Manage product requirements along the lifecycle of the productBe the interface between customers and design engineering teamDevelop user guides for new productsDevelop product collateral for marketing and presentations to clients. Perform product demonstrations to clientsDevelop SKU matrix and manufacturing data about the product for the factory.Assist product managers in their day-to-day activities including management of product related documentation, development of business cases and market analysis, development of product roadmaps, etcExperience and Qualifications Degree in Electrical Engineering, Computer Science, mechanical engineering or similar with 2 - 5 years of working experience Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • willenhall, west midlands
      • contract
      • £35,000 - £40,000 per year
      • randstad cpe
      Sourcing Manager The opportunity on offerWe are looking to recruit a procurement professional to join our established UK procurement team. You will be responsible for regularly scanning the European and global marketplace and suppliers, collecting facts and then delivering relevant marketplace and supplier data, including 'clean sheet' analysis, to ensure effective construction of category strategies in close co-operation with key stakeholders for the best interest of Tata Steel UK. You will convert demands of TSUK end users and construct an effective business requirements overview, and an appropriate sourcing plan that maximises value across TSUK within the framework of an agreed category strategy. You will deliver all required aspects of pre-contract work, supplier selection, negotiation, closing and putting in place contracts that deliver short and medium term value for TSUK. Managing the contract through its life cycle by frequently analysing its effectiveness, in close co-operation with the contract management organisation and the end user and taking action based on KPI results.Applicants will also Operate as the point of leadership for vendor relationships ensuring fact-based communication as well as taking accountability for ensuring that operations-based contract managers are engaged in contract strategies, escalating effectively where performance gaps appear. Manage through "influence, gravitas and expertise" the effective delivery of value throughout the life of the contract.The current vacancy exists with in our Services team where you will have the opportunity to engage with multi £m contracts and be part of an exciting and dynamic team. You should be confident at engaging people at all levels of the organisation, you should also be confident working alone and as part of a team as both aspects will be required from time to time.Who we're looking forYou will be an experienced Procurement/Purchasing professional educated to degree level in a technical or business related field, or equivalent practical experience. Applicants will have relevant experience in Commodity Management, Strategic Sourcing or Supply Chain Management experience.Ideally, you will have experience or be interested in developing cost models, cost trends and product development. We're looking for applicants who have the confidence in collaborating and working cross-functionally with operations/manufacturing teams, engineering, finance and legal.TSUK purchases items/services across a wide range of sectors/categories so particular experience in one or more areas of the following would be of particular interest to us:Procurement of Goods or ServicesRaw materials used for steelmaking operations including category knowledge in metals, ferrous scrap, alloys, chemicals, industrial paint, refractories, minerals, packagingMarket AnalysisGlobal Sourcing The successful candidate will be able to operate within a cross functionally based team and be willing to travel as required.Our UK Procurement organisation has responsibility for the lowest possible cost base and maximizing the value out of supply agreements for Tata Steel; delivering a professional procurement service to businesses and leading several pan-Tata Steel procurement sectors; and also leading a stronger drive for supply chain effectiveness and realisation of challenging group and business-specific targets. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Sourcing Manager The opportunity on offerWe are looking to recruit a procurement professional to join our established UK procurement team. You will be responsible for regularly scanning the European and global marketplace and suppliers, collecting facts and then delivering relevant marketplace and supplier data, including 'clean sheet' analysis, to ensure effective construction of category strategies in close co-operation with key stakeholders for the best interest of Tata Steel UK. You will convert demands of TSUK end users and construct an effective business requirements overview, and an appropriate sourcing plan that maximises value across TSUK within the framework of an agreed category strategy. You will deliver all required aspects of pre-contract work, supplier selection, negotiation, closing and putting in place contracts that deliver short and medium term value for TSUK. Managing the contract through its life cycle by frequently analysing its effectiveness, in close co-operation with the contract management organisation and the end user and taking action based on KPI results.Applicants will also Operate as the point of leadership for vendor relationships ensuring fact-based communication as well as taking accountability for ensuring that operations-based contract managers are engaged in contract strategies, escalating effectively where performance gaps appear. Manage through "influence, gravitas and expertise" the effective delivery of value throughout the life of the contract.The current vacancy exists with in our Services team where you will have the opportunity to engage with multi £m contracts and be part of an exciting and dynamic team. You should be confident at engaging people at all levels of the organisation, you should also be confident working alone and as part of a team as both aspects will be required from time to time.Who we're looking forYou will be an experienced Procurement/Purchasing professional educated to degree level in a technical or business related field, or equivalent practical experience. Applicants will have relevant experience in Commodity Management, Strategic Sourcing or Supply Chain Management experience.Ideally, you will have experience or be interested in developing cost models, cost trends and product development. We're looking for applicants who have the confidence in collaborating and working cross-functionally with operations/manufacturing teams, engineering, finance and legal.TSUK purchases items/services across a wide range of sectors/categories so particular experience in one or more areas of the following would be of particular interest to us:Procurement of Goods or ServicesRaw materials used for steelmaking operations including category knowledge in metals, ferrous scrap, alloys, chemicals, industrial paint, refractories, minerals, packagingMarket AnalysisGlobal Sourcing The successful candidate will be able to operate within a cross functionally based team and be willing to travel as required.Our UK Procurement organisation has responsibility for the lowest possible cost base and maximizing the value out of supply agreements for Tata Steel; delivering a professional procurement service to businesses and leading several pan-Tata Steel procurement sectors; and also leading a stronger drive for supply chain effectiveness and realisation of challenging group and business-specific targets. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
    12 of 188 jobs seen

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.