thank you for subscribing to your personalised job alerts.

    5 jobs found in west midlands

    filter4
    • specialism2
      working in
      show 5 jobs
      clear filter
    • location1
      location & range
        show 5 jobs
        clear filter
      • job types
        job types
        show 5 jobs
        clear filter
      • salary
        salary
        show 5 jobs
        clear filter
      clear all
        • wolverhampton, west midlands
        • contract
        • £30.00 - £40.31 per hour
        • randstad cpe
        Job Description Drivetrain Product aftermarket Services Engineer with focus on BCP drivetrain aftermarket parts and services growth. Developing strategy and execution plans for BCP drivetrain, whilst maintaining alignment across the extended organisation. Working directly with the aftermarket (AFM) lead engineer, the divisional AFM leads and the enterprise drivetrain organisation. This role will report to the BCP drivetrain Product Manager. Job Duties/Responsibilities may include, but are not limited to: Develop AFM long term strategic plans and execute short terms for revenue and margin enhancement.Ensure all parts conform to our branding strategy.Establish intellectual property and customer value necessary to protect and grow part salesDevelop process to reduce customer downtime and dealer revenue through improved parts availabilityEstablish data-based plans to grow service and repair product offerings.Implement changes to engineering and procurement data to improve accuracy of service parts offerings, including kits and alternative service replacement offerings.Assist with the creation of improvement service parts information necessary for Caterpillar e-commerce websites, improving customer experience and engagement.Through Market research develop parts and service solutions to improve customer and dealer engagement.Develop plans for margin improvement.Develop a process to embed all AFM improvements into new product development. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Job Description Drivetrain Product aftermarket Services Engineer with focus on BCP drivetrain aftermarket parts and services growth. Developing strategy and execution plans for BCP drivetrain, whilst maintaining alignment across the extended organisation. Working directly with the aftermarket (AFM) lead engineer, the divisional AFM leads and the enterprise drivetrain organisation. This role will report to the BCP drivetrain Product Manager. Job Duties/Responsibilities may include, but are not limited to: Develop AFM long term strategic plans and execute short terms for revenue and margin enhancement.Ensure all parts conform to our branding strategy.Establish intellectual property and customer value necessary to protect and grow part salesDevelop process to reduce customer downtime and dealer revenue through improved parts availabilityEstablish data-based plans to grow service and repair product offerings.Implement changes to engineering and procurement data to improve accuracy of service parts offerings, including kits and alternative service replacement offerings.Assist with the creation of improvement service parts information necessary for Caterpillar e-commerce websites, improving customer experience and engagement.Through Market research develop parts and service solutions to improve customer and dealer engagement.Develop plans for margin improvement.Develop a process to embed all AFM improvements into new product development. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • willenhall, west midlands
        • permanent
        • £30,000 - £30,000, per year, Plus Shift Allowance
        • randstad cpe
        The RoleAs an Electrical Maintenance Engineer, you will support our operations teams by performing necessary breakdown repairs, leading preventative maintenance activity and facilitating the promotion of engineering solutions for process improvement to ensure process availability and productivity are optimised.The role of the Maintenance Engineers is to effectively maintain all process and auxiliary equipment across the Steelpark with an aim to improve up time while reducing costs. All maintenance engineers will be expected to work a 3 shift- rotating pattern (Monday to Friday) with cover at the weekend when needed. Duties and responsibilities within the role include but are not limited to: Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost.Adhere to the preventative maintenance programmes to ensure that unplanned downtime is avoided.Through utilisation of the SHIRE (PM) system ensure engineering spares and inventory on site are managed within budget constraints and equipment downtime is minimised.Deliver training to operators in order they are able to understand and implement basic maintenance activities facilitating optimum productivity.Procure and manage contract resource to ensure prompt and cost effective recovery from breakdown.Facilitate optimal performance by working flexibly within the team and the context of the site, undertaking maintenance at short notice.Ensure that own and team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in manner which fully complies with Health & Safety, quality, environmental and corporate policies.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.To provide a source of expertise in programmable/configurable devices (instrumentation, PLCs, drives etc.)The CandidateThe ideal candidate must be qualified to ONC, HND or City & Guilds Mechanical or ONC, HND or City & Guilds Electrical.Applicants will have demonstrable experience of a relevant engineering discipline, continuous improvement processes, preventative maintenance techniques and dealing with contractors. Experience of first stage fault finding, PLCs, drives and AC/DC controllers is also desirable. Alternatively, in depth knowledge of pneumatics, hydraulics, welding and first stage mechanical fault finding.You will have the ability to demonstrate excellent communication and organisational skills and be computer literate. The ability to work without close supervision, yet under pressure and to tight timescales is essential.The BenefitsOur Client offers their employees significant benefits packages. For this role, you will benefit from:A market competitive salary35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) We also have an extensive list of lifestyle benefits including free on site parking at all of our sites, an employee assistance programme as well as discounts with local and national retailers and services. Employee discount scheme for companies including Vodafone, Nissan, Jaguar Land Rover and also various local services Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        The RoleAs an Electrical Maintenance Engineer, you will support our operations teams by performing necessary breakdown repairs, leading preventative maintenance activity and facilitating the promotion of engineering solutions for process improvement to ensure process availability and productivity are optimised.The role of the Maintenance Engineers is to effectively maintain all process and auxiliary equipment across the Steelpark with an aim to improve up time while reducing costs. All maintenance engineers will be expected to work a 3 shift- rotating pattern (Monday to Friday) with cover at the weekend when needed. Duties and responsibilities within the role include but are not limited to: Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost.Adhere to the preventative maintenance programmes to ensure that unplanned downtime is avoided.Through utilisation of the SHIRE (PM) system ensure engineering spares and inventory on site are managed within budget constraints and equipment downtime is minimised.Deliver training to operators in order they are able to understand and implement basic maintenance activities facilitating optimum productivity.Procure and manage contract resource to ensure prompt and cost effective recovery from breakdown.Facilitate optimal performance by working flexibly within the team and the context of the site, undertaking maintenance at short notice.Ensure that own and team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in manner which fully complies with Health & Safety, quality, environmental and corporate policies.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.To provide a source of expertise in programmable/configurable devices (instrumentation, PLCs, drives etc.)The CandidateThe ideal candidate must be qualified to ONC, HND or City & Guilds Mechanical or ONC, HND or City & Guilds Electrical.Applicants will have demonstrable experience of a relevant engineering discipline, continuous improvement processes, preventative maintenance techniques and dealing with contractors. Experience of first stage fault finding, PLCs, drives and AC/DC controllers is also desirable. Alternatively, in depth knowledge of pneumatics, hydraulics, welding and first stage mechanical fault finding.You will have the ability to demonstrate excellent communication and organisational skills and be computer literate. The ability to work without close supervision, yet under pressure and to tight timescales is essential.The BenefitsOur Client offers their employees significant benefits packages. For this role, you will benefit from:A market competitive salary35 days holidays per annumAnnual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) We also have an extensive list of lifestyle benefits including free on site parking at all of our sites, an employee assistance programme as well as discounts with local and national retailers and services. Employee discount scheme for companies including Vodafone, Nissan, Jaguar Land Rover and also various local services Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • shrewsbury, west midlands
        • contract
        • £12.68 per hour
        • randstad cpe
        Are you looking for a new challenge? Our client is an Engineering business based in Shrewsbury, they are currently looking for a Material Planner to join their team. The ideal candidate will have transferable skills and experience in a similar position.As a Material Planning Analyst, you will collaborate with suppliers to ensure execution to planned orders and schedulesResolves issues with suppliers to ensure material availability for facility productionWork with a cross functional team including operations, quality and purchasing to support facility production and point of use material availabilityEnsures alignment of facility inventory accuracy and inventory systems planning parameters with the plan for every part to maintain planning integrityEnsure timely delivery of materials to the facility Supplier collaboration to meet facility production plansUtilize root cause corrective actions to resolve supplier performance issues Analyse established parts schedules and production requirements Convert requirements into appropriate piece parts Requisition materials and regulate inventory levelsManage and perform supplier scheduling and implementation of engineering changes for the efficient manufacture of products and components Support supply chain performance efforts by monitoring and tracking supplier performance metricsDeliver improvements in point of use material availability Provide Material Planning expertise to facility functions in support of improving demand variability, forecast credibility and usability for production planningCandidates need to demonstrate the following attributes: Knowledge of production scheduling and material requirements planning Experience of using MRP systems Knowledge and/or experience in material control, purchasing or logistics Knowledge and understanding of 6 Sigma / Lean principles Strong analytical and problem-solving skillsExcellent interpersonal, teamwork, organization and communication skills Good PC Skills are essential, able to use MS Excel to intermediate standard or higherDemonstration of the following attributes would be advantageous: College or university degree, or equivalent, preferably in Supply Chain and/or Logistics (Desired) APICS CPIM or CSPC National Certification (Desired) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Are you looking for a new challenge? Our client is an Engineering business based in Shrewsbury, they are currently looking for a Material Planner to join their team. The ideal candidate will have transferable skills and experience in a similar position.As a Material Planning Analyst, you will collaborate with suppliers to ensure execution to planned orders and schedulesResolves issues with suppliers to ensure material availability for facility productionWork with a cross functional team including operations, quality and purchasing to support facility production and point of use material availabilityEnsures alignment of facility inventory accuracy and inventory systems planning parameters with the plan for every part to maintain planning integrityEnsure timely delivery of materials to the facility Supplier collaboration to meet facility production plansUtilize root cause corrective actions to resolve supplier performance issues Analyse established parts schedules and production requirements Convert requirements into appropriate piece parts Requisition materials and regulate inventory levelsManage and perform supplier scheduling and implementation of engineering changes for the efficient manufacture of products and components Support supply chain performance efforts by monitoring and tracking supplier performance metricsDeliver improvements in point of use material availability Provide Material Planning expertise to facility functions in support of improving demand variability, forecast credibility and usability for production planningCandidates need to demonstrate the following attributes: Knowledge of production scheduling and material requirements planning Experience of using MRP systems Knowledge and/or experience in material control, purchasing or logistics Knowledge and understanding of 6 Sigma / Lean principles Strong analytical and problem-solving skillsExcellent interpersonal, teamwork, organization and communication skills Good PC Skills are essential, able to use MS Excel to intermediate standard or higherDemonstration of the following attributes would be advantageous: College or university degree, or equivalent, preferably in Supply Chain and/or Logistics (Desired) APICS CPIM or CSPC National Certification (Desired) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • willenhall, west midlands
        • contract
        • £35,000 per year
        • randstad cpe
        Are you an experienced Mechanical Maintenance Engineer? Are you looking to work with one of the UK's biggest manufacturing companies? Then this is the role for you!We are currently recruiting for a Mechanical Maintenance Engineer to work on a 3 shift pattern rotating weekly. You will be working in a team of engineers to maintain equipment for the company. Initially this is a 12 month contract but it will roll on if you fit in well with the team. The pay for the year is £35,000 and there are also other benefits such as the company pension scheme. If you would like to apply, you can submit your CV here or drop me an email at if you have any questions you would like to ask! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Are you an experienced Mechanical Maintenance Engineer? Are you looking to work with one of the UK's biggest manufacturing companies? Then this is the role for you!We are currently recruiting for a Mechanical Maintenance Engineer to work on a 3 shift pattern rotating weekly. You will be working in a team of engineers to maintain equipment for the company. Initially this is a 12 month contract but it will roll on if you fit in well with the team. The pay for the year is £35,000 and there are also other benefits such as the company pension scheme. If you would like to apply, you can submit your CV here or drop me an email at if you have any questions you would like to ask! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • telford, west midlands
        • permanent
        • £23,500 - £27,000 per year
        • randstad inhouse services
        CNC SetterDo you have experience in CNC setting? If yes, we have a great opportunity for you in a new, professional factory environment. With a competitive salary, set shift patterns and training. If this sounds like the job for you, apply today!Salary: CompetitiveYour main responsibilities will be the following:RThis position requires a time served CNC Setter with a proven track record and experience inmachining aluminium diecast components on high speed 5 axis machines. Reporting directly to theProcess Engineering Manager the CNC Senior Setter is required to be able to work off their owninitiative whilst also liaising with Production, Quality and Maintenance to respond to any issues thataffect CNC operation.The CNC Senior Setter is responsible for proving new programs, commissioning new fixtures andcutting tools. Monitoring part quality and dimensional reports to maintain optimum machiningconditions. The CNC Setter will be responsible for the training and development of thesetter/operators across the shift pattern and control standards and safe working practices.Responsibilities Include but are not limited to :This role entails but is not limited to: -- Support production on a daily basis.- Competent in running CNC's and all aspects of the machine performance, fault finding and diagnostics.- Maintain hydraulic fixture operation, clamping repeatability and machining position to casting.- Change tools, track tool life, investigate tool breakages, maintain tool stocks, tooling orders and deal with tooling suppliers.- Monitor part quality, adjust offsets and improve process capability.- Develop and maintain process documentation as well as assist in the generation of SWI's.- Set procedures and standards- Drive TPM and 5S- Train, mentor and guide others on how to operate equipment safely and correctly- Other related duties as determined by the Process Engineering Manager or Process Engineers.- Promote the companies HSE policies across the department and plantExperience Requirements:- Apprentice served or formal college certification- Proven CNC machine setting in a JIT production environment.- 5 axis high speed machining of aluminium castings.- Demonstrate suitable problem-solving techniques- Programming G&M codes, preferably Siemens controllers.- Strong understanding of tooling & fixture design principles- Delivery of trainingDesirable ExperienceExperience within castings sectorIOSH QualificationTier 1 automotive supplyCNC Specific training packagesCNC SettingTraining of team membersBasic understanding of OEE calculation and what drives the metric from the cellABB robot operation and programmingPersonal Attributes- Self-motivated, organised, and able to prioritise tasks against demand.- Good problem-solving skills with a logical approach.- Able to maintain focus on the wide range of challenges that arise via the generation of lists/action trackers to working from notes.- Confidence to challenge existing working practices and raise the standard.- Work collaboratively to achieve project/company goals- Work independently to deliver a sustainable process- Good communicator both written and verbal- Ability to work under pressure- Proactive in approach with a "can do attitude"- Flexibility. Willingness to attend off-site training courses as required and offset workinghours to facilitate training and face to face communications when necessary.- Eligibility to work in the UKPlant conditions necessitate exposure to heat, cold, dust, hot objects, and loud noises within our manufacturing environment. Full Health and Safety training and PPE provided for all conditions
        CNC SetterDo you have experience in CNC setting? If yes, we have a great opportunity for you in a new, professional factory environment. With a competitive salary, set shift patterns and training. If this sounds like the job for you, apply today!Salary: CompetitiveYour main responsibilities will be the following:RThis position requires a time served CNC Setter with a proven track record and experience inmachining aluminium diecast components on high speed 5 axis machines. Reporting directly to theProcess Engineering Manager the CNC Senior Setter is required to be able to work off their owninitiative whilst also liaising with Production, Quality and Maintenance to respond to any issues thataffect CNC operation.The CNC Senior Setter is responsible for proving new programs, commissioning new fixtures andcutting tools. Monitoring part quality and dimensional reports to maintain optimum machiningconditions. The CNC Setter will be responsible for the training and development of thesetter/operators across the shift pattern and control standards and safe working practices.Responsibilities Include but are not limited to :This role entails but is not limited to: -- Support production on a daily basis.- Competent in running CNC's and all aspects of the machine performance, fault finding and diagnostics.- Maintain hydraulic fixture operation, clamping repeatability and machining position to casting.- Change tools, track tool life, investigate tool breakages, maintain tool stocks, tooling orders and deal with tooling suppliers.- Monitor part quality, adjust offsets and improve process capability.- Develop and maintain process documentation as well as assist in the generation of SWI's.- Set procedures and standards- Drive TPM and 5S- Train, mentor and guide others on how to operate equipment safely and correctly- Other related duties as determined by the Process Engineering Manager or Process Engineers.- Promote the companies HSE policies across the department and plantExperience Requirements:- Apprentice served or formal college certification- Proven CNC machine setting in a JIT production environment.- 5 axis high speed machining of aluminium castings.- Demonstrate suitable problem-solving techniques- Programming G&M codes, preferably Siemens controllers.- Strong understanding of tooling & fixture design principles- Delivery of trainingDesirable ExperienceExperience within castings sectorIOSH QualificationTier 1 automotive supplyCNC Specific training packagesCNC SettingTraining of team membersBasic understanding of OEE calculation and what drives the metric from the cellABB robot operation and programmingPersonal Attributes- Self-motivated, organised, and able to prioritise tasks against demand.- Good problem-solving skills with a logical approach.- Able to maintain focus on the wide range of challenges that arise via the generation of lists/action trackers to working from notes.- Confidence to challenge existing working practices and raise the standard.- Work collaboratively to achieve project/company goals- Work independently to deliver a sustainable process- Good communicator both written and verbal- Ability to work under pressure- Proactive in approach with a "can do attitude"- Flexibility. Willingness to attend off-site training courses as required and offset workinghours to facilitate training and face to face communications when necessary.- Eligibility to work in the UKPlant conditions necessitate exposure to heat, cold, dust, hot objects, and loud noises within our manufacturing environment. Full Health and Safety training and PPE provided for all conditions

      thank you for subscribing to your personalised job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.