Thank you for subscribing to your personalised job alerts.

    5 jobs found in newport

    filter3
    clear all
      • newport, wales
      • permanent
      • £40,000 - £55,000 per year
      • randstad technologies
      Software Development EngineerNewport£40,000-£55,000 My client design, develop, and manufacture high-tech capital equipment for the global semiconductor market and are on the lookout for an experiended Software Engineer to join them.Purpose of the roleReporting to the Software Manager, this pivotal role within the team will utilise your knowledge and experience in C++ to design, develop, test, release and maintain new and legacy equipment control software.Your day-to-day responsibilities will include:Developing industrial control software using C++ under Microsoft WindowsAccountable for writing, testing, and deploying high-quality / performance codeFully document work, to include software design specifications, test plans and release notesTesting software on suitable hardware within a multi-disciplinary teamEnsuring all software meets required standards of safety, quality, performance, and securityExperience, knowledge & qualifications required:An experienced Software Engineer / Senior Software Engineer, ideally gained in a technical industryDegree qualified in Software Engineering, Computer Science, Electronic Engineering, or a related subjectBe up to date with software development methods and technologiesExperienced in software design with the use of C++An appreciation of the full software development life cycleAn understanding of Agile/SCRUM methods For this role we are looking for someone who has:Excellent logical/analytical skills coupled with strong problem-solving abilitiesGood time management / multi-tasking skills to deliver results within strictly defined release timelinesExcellent communication skillsAbility to work both autonomously and as part of a teamResilient with the ability to respond to changing prioritiesA high degree of flexibilityComfortable working collaboratively across the business to enable successful delivery of productsIf this sounds like something you are intersted in discussing further, please apply within, or contact Fin at Randstad Engineering. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Software Development EngineerNewport£40,000-£55,000 My client design, develop, and manufacture high-tech capital equipment for the global semiconductor market and are on the lookout for an experiended Software Engineer to join them.Purpose of the roleReporting to the Software Manager, this pivotal role within the team will utilise your knowledge and experience in C++ to design, develop, test, release and maintain new and legacy equipment control software.Your day-to-day responsibilities will include:Developing industrial control software using C++ under Microsoft WindowsAccountable for writing, testing, and deploying high-quality / performance codeFully document work, to include software design specifications, test plans and release notesTesting software on suitable hardware within a multi-disciplinary teamEnsuring all software meets required standards of safety, quality, performance, and securityExperience, knowledge & qualifications required:An experienced Software Engineer / Senior Software Engineer, ideally gained in a technical industryDegree qualified in Software Engineering, Computer Science, Electronic Engineering, or a related subjectBe up to date with software development methods and technologiesExperienced in software design with the use of C++An appreciation of the full software development life cycleAn understanding of Agile/SCRUM methods For this role we are looking for someone who has:Excellent logical/analytical skills coupled with strong problem-solving abilitiesGood time management / multi-tasking skills to deliver results within strictly defined release timelinesExcellent communication skillsAbility to work both autonomously and as part of a teamResilient with the ability to respond to changing prioritiesA high degree of flexibilityComfortable working collaboratively across the business to enable successful delivery of productsIf this sounds like something you are intersted in discussing further, please apply within, or contact Fin at Randstad Engineering. Randstad Technologies Ltd is a leading specialist recruitment business for the IT industry. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • newport, wales
      • contract
      • £13.83 per hour
      • randstad cpe
      Machinist Craftsman Randstad Engineering are currently looking for a Machinist to work for a multi site, world wide client in Llanwern, Newport. The role is on an initial 12 month contract and paying an hourly rate of £13.83 per hour on a 40 hour week. This role will be working on a day shift so there is no shift allowance. HOURLY RATE: £13.83 per hour HOURS: 40 hours per week on a day shift Purpose Machinists within the workshops will perform the duties of a time served machinist. They will machine components to engineering drawings and plant equipment from works area and ensure all tolerances and specifications are met and work to ISO 9001 and ISO 14001. Accountabilities You must be able to understand engineering drawings in order to machine items to required tolerances. With the ability to check and measure own work and work to all ISO 9001 and ISO 14001 criteriaTo ensure all activities comply with safety requirements and bring any quality and safety issues to the Leading Hand if it is not possible to take immediate corrective action.To undertake any activities as instructed by the Leading Hand or other members of the Management Team provided it is safe to do so.Utilise Fork lift truck driving, slinging/rigging and operation of overhead cranes if licensed to complete work movements in a safe organised mannerTo feedback all information relating to work undertaken to Leading Hand and complete relevant Q.A documentation.Have daily interaction with Team Members on the same team.Working together to achieve targets and goals.To continually update the Service Engineer/Leading Hand and fully engage with any team input required to help with the repair/manufacture of required items to the required QA standards.To work to a high standard using measuring equipment and machine shop machinery that is in compliance and to perform under pressure as and when required.Attention to safe working practices is essential as the company operates a Zero Compromise towards Safety and must be pro-active in achieving all safety goals. To assist and carry out where appropriate, the failure analyses and implement practical cost effective solutions.To actively participate in solutions generated via problem solving activity with a wide range of other personnel as appropriate.To work alongside contract or agency labour as appropriate and in so doing set the standard and direction for the work to be done.To ensure that the appropriate level and quality of spares requirement is identified and arrangements are in place to satisfy operational demands.To help coach others, including shift teams and contractor personnel, in order to install high standards and develop engineering skills in others for overall business benefit.To work in a totally flexible manner to support and participate in all team activities aimed at achieving manufacturing and product quality targets. Qualifications & Experience The candidate must be time served machinist and have adequate relevant plant experience in industry.He/she must have good communications skills.The candidate must be able to work as part of a multi-disciplined team.He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Machinist Craftsman Randstad Engineering are currently looking for a Machinist to work for a multi site, world wide client in Llanwern, Newport. The role is on an initial 12 month contract and paying an hourly rate of £13.83 per hour on a 40 hour week. This role will be working on a day shift so there is no shift allowance. HOURLY RATE: £13.83 per hour HOURS: 40 hours per week on a day shift Purpose Machinists within the workshops will perform the duties of a time served machinist. They will machine components to engineering drawings and plant equipment from works area and ensure all tolerances and specifications are met and work to ISO 9001 and ISO 14001. Accountabilities You must be able to understand engineering drawings in order to machine items to required tolerances. With the ability to check and measure own work and work to all ISO 9001 and ISO 14001 criteriaTo ensure all activities comply with safety requirements and bring any quality and safety issues to the Leading Hand if it is not possible to take immediate corrective action.To undertake any activities as instructed by the Leading Hand or other members of the Management Team provided it is safe to do so.Utilise Fork lift truck driving, slinging/rigging and operation of overhead cranes if licensed to complete work movements in a safe organised mannerTo feedback all information relating to work undertaken to Leading Hand and complete relevant Q.A documentation.Have daily interaction with Team Members on the same team.Working together to achieve targets and goals.To continually update the Service Engineer/Leading Hand and fully engage with any team input required to help with the repair/manufacture of required items to the required QA standards.To work to a high standard using measuring equipment and machine shop machinery that is in compliance and to perform under pressure as and when required.Attention to safe working practices is essential as the company operates a Zero Compromise towards Safety and must be pro-active in achieving all safety goals. To assist and carry out where appropriate, the failure analyses and implement practical cost effective solutions.To actively participate in solutions generated via problem solving activity with a wide range of other personnel as appropriate.To work alongside contract or agency labour as appropriate and in so doing set the standard and direction for the work to be done.To ensure that the appropriate level and quality of spares requirement is identified and arrangements are in place to satisfy operational demands.To help coach others, including shift teams and contractor personnel, in order to install high standards and develop engineering skills in others for overall business benefit.To work in a totally flexible manner to support and participate in all team activities aimed at achieving manufacturing and product quality targets. Qualifications & Experience The candidate must be time served machinist and have adequate relevant plant experience in industry.He/she must have good communications skills.The candidate must be able to work as part of a multi-disciplined team.He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • newport, wales
      • contract
      • £14 per year
      • randstad cpe
      We are recruiting for a calibration technician to join our business based in Newport. As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please drop me an email at Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      We are recruiting for a calibration technician to join our business based in Newport. As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please drop me an email at Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • newport, wales
      • contract
      • £13.83 per hour
      • randstad cpe
      Mechanical Maintenance Technician We are looking for a Mechanical Maintenance Technician to work for TATA Steel in Newport. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour, on a 40 hour week and working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company requirements. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP).Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.Installation and testing of equipment. Requirements / Personal SpecificationThe jobholder must be industrial Engineering experienceMust have experience of working within a safe system of workNVQ level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Mechanical Maintenance Technician We are looking for a Mechanical Maintenance Technician to work for TATA Steel in Newport. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour, on a 40 hour week and working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company requirements. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP).Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.Installation and testing of equipment. Requirements / Personal SpecificationThe jobholder must be industrial Engineering experienceMust have experience of working within a safe system of workNVQ level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      • newport, wales
      • contract
      • £13.83 per hour
      • randstad cpe
      Mechanical Maintenance Technician We are looking for a Mechanical Maintenance Technician to work for TATA Steel in Newport. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour, on a 40 hour week and working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company requirements. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP).Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.Installation and testing of equipment. Requirements / Personal SpecificationThe jobholder must be industrial Engineering experienceMust have experience of working within a safe system of workNVQ level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
      Mechanical Maintenance Technician We are looking for a Mechanical Maintenance Technician to work for TATA Steel in Newport. The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour, on a 40 hour week and working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company requirements. The Responsibilities Role responsibilities will include, but not be limited to the following:Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale.Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required.Obtaining maintenance schedules from the maintenance management system (SAP).Locating spare parts using the maintenance management system. Collecting and returning spares to stores.To work under the permitry rules. Issuing certificates / permits as and when required.Installation and testing of equipment. Requirements / Personal SpecificationThe jobholder must be industrial Engineering experienceMust have experience of working within a safe system of workNVQ level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

    Thank you for subscribing to your personalised job alerts.

    It looks like you want to switch your language. This will reset your filters on your current job search.