thank you for subscribing to your personalised job alerts.

    4 jobs found in newport newport, wales

    filter4
    • specialism2
      working in
      show 4 jobs
      clear filter
    • location1
      location & range
        show 4 jobs
        clear filter
      • job types
        job types
        show 4 jobs
        clear filter
      • salary
        salary
        show 4 jobs
        clear filter
      clear all
        • newport, wales
        • contract
        • £14 per year
        • randstad cpe
        We are recruiting for a calibration technician to join our business based in Newport. As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please drop me an email at Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        We are recruiting for a calibration technician to join our business based in Newport. As a calibration technician your responsibilites will be as follows: Create and to verify calibration data sheets, for technical content and accuracy.Develop calibration procedures to meet the needs of the company.Complete all documentation associated with the position accurately and effectively while maintain the Quality Document Inspection (QDI) and Process Verification Inspection (PVI) ensuring a minimal discrepancy rate.Assist Quality Department in both investigation and analysis.Perform daily inspections/audits of shop floor calibrated tooling equipment to ensure compliance.Manage the master controlled measuring equipment to the UKAS National/International standard.Test, measure and record all site Orifice plates to the EUETS standard.Perform scheduled calibration on required items with minimal disruption to production.Control all calibrated equipment through registers, check sheets and sign off sheets.Carry out calibration on Items identified within the remit of the Calibration Technician.Organise out going Calibration on designated items.Purchase of new Calibration items and equipment, through the company request system.Ensure all documentation from externally calibrated or new equipment is correct and logged into S.A.P. /Register efficiently and accurately If you would like any more information, please drop me an email at Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • llanwern, wales
        • contract
        • £13.83 per hour
        • randstad cpe
        We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Llanwern The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement.The ResponsibilitiesRole responsibilities will include, but not be limited to the following: * Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale. * Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required. * Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications. * Locating spare parts using the maintenance management system. Collecting and returning spares to stores. * To work under the permitry rules. Issuing certificates / permits as and when required. * To assess all engineering plant changes using the Management of Change (MOC) system. * Installation and testing of equipment. Requirements / Personal Specification * The jobholder must have industrial Engineering experience * Must have experience of working within a safe system of work * Level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        We are looking for a Mechanical Maintenance Technician to work for our world wide raw material business in Llanwern The position exists to provide specialist mechanical engineering support as required. The pay for this position is £13.83 per hour on a 40 hour week, working a day shift.The successful candidate will be responsible for ensuring all activities are undertaken within Health, Safety and Environmental requirements and in compliance with company and legislative requirements. The jobholder will work as part of a team to ensure manufacturing performance on an ongoing basis and to support manufacturing development plans, identifying opportunities for improvement.The ResponsibilitiesRole responsibilities will include, but not be limited to the following: * Diagnosing and repairing equipment breakdowns. Identifying failure modes of plant equipment and returning the equipment to operation safely and in a reasonable timescale. * Carrying out maintenance routines on plant and equipment. Diagnosing and repairing equipment failures as required. * Obtaining maintenance schedules from the maintenance management system (SAP) and feeding back work carried out. Work arising to be recorded using notifications. * Locating spare parts using the maintenance management system. Collecting and returning spares to stores. * To work under the permitry rules. Issuing certificates / permits as and when required. * To assess all engineering plant changes using the Management of Change (MOC) system. * Installation and testing of equipment. Requirements / Personal Specification * The jobholder must have industrial Engineering experience * Must have experience of working within a safe system of work * Level 3 qualification in mechanical engineering Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • llanwern, wales
        • contract
        • £13.83 per hour
        • randstad cpe
        Are you an experienced machinist with manual experience? Are you looking for a new and exciting role based in Llanwern?Then this is the role for you! Machinists within the workshops will perform the duties of a time served machinist. They will machine components to engineering drawings and plant equipment from works area and ensure all tolerances and specifications are met and work to ISO 9001 and ISO 14001. AccountabilitiesYou must be able to understand engineering drawings in order to machine items to required tolerances. With the ability to check and measure own work and work to all ISO 9001 and ISO 14001 criteriaTo ensure all activities comply with safety requirements and bring any quality and safety issues to the Leading Hand if it is not possible to take immediate corrective action.To undertake any activities as instructed by the Leading Hand or other members of the Management Team provided it is safe to do so.Utilise Fork lift truck driving, slinging/rigging and operation of overhead cranes if licensed to complete work movements in a safe organised mannerTo feedback all information relating to work undertaken to Leading Hand and complete relevant Q.A documentation.Have daily interaction with Team Members on the same team.Working together to achieve targets and goals.To continually update the Service Engineer/Leading Hand and fully engage with any team input required to help with the repair/manufacture of required items to the required QA standards.To work to a high standard using measuring equipment and machine shop machinery that is in compliance and to perform under pressure as and when required.Attention to safe working practices is essential as the company operates a Zero Compromise towards Safety and must be pro-active in achieving all safety goals. To assist and carry out where appropriate, the failure analyses and implement practical cost effective solutions.To actively participate in solutions generated via problem solving activity with a wide range of other personnel as appropriate.To work alongside contract or agency labour as appropriate and in so doing set the standard and direction for the work to be done.To ensure that the appropriate level and quality of spares requirement is identified and arrangements are in place to satisfy operational demands.To help coach others, including shift teams and contractor personnel, in order to install high standards and develop engineering skills in others for overall business benefit.To work in a totally flexible manner to support and participate in all team activities aimed at achieving manufacturing and product quality targets. Qualifications & ExperienceThe candidate must be time served machinist and have adequate relevant plant experience in industry.He/she must have good communications skills.The candidate must be able to work as part of a multi-disciplined team.He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Are you an experienced machinist with manual experience? Are you looking for a new and exciting role based in Llanwern?Then this is the role for you! Machinists within the workshops will perform the duties of a time served machinist. They will machine components to engineering drawings and plant equipment from works area and ensure all tolerances and specifications are met and work to ISO 9001 and ISO 14001. AccountabilitiesYou must be able to understand engineering drawings in order to machine items to required tolerances. With the ability to check and measure own work and work to all ISO 9001 and ISO 14001 criteriaTo ensure all activities comply with safety requirements and bring any quality and safety issues to the Leading Hand if it is not possible to take immediate corrective action.To undertake any activities as instructed by the Leading Hand or other members of the Management Team provided it is safe to do so.Utilise Fork lift truck driving, slinging/rigging and operation of overhead cranes if licensed to complete work movements in a safe organised mannerTo feedback all information relating to work undertaken to Leading Hand and complete relevant Q.A documentation.Have daily interaction with Team Members on the same team.Working together to achieve targets and goals.To continually update the Service Engineer/Leading Hand and fully engage with any team input required to help with the repair/manufacture of required items to the required QA standards.To work to a high standard using measuring equipment and machine shop machinery that is in compliance and to perform under pressure as and when required.Attention to safe working practices is essential as the company operates a Zero Compromise towards Safety and must be pro-active in achieving all safety goals. To assist and carry out where appropriate, the failure analyses and implement practical cost effective solutions.To actively participate in solutions generated via problem solving activity with a wide range of other personnel as appropriate.To work alongside contract or agency labour as appropriate and in so doing set the standard and direction for the work to be done.To ensure that the appropriate level and quality of spares requirement is identified and arrangements are in place to satisfy operational demands.To help coach others, including shift teams and contractor personnel, in order to install high standards and develop engineering skills in others for overall business benefit.To work in a totally flexible manner to support and participate in all team activities aimed at achieving manufacturing and product quality targets. Qualifications & ExperienceThe candidate must be time served machinist and have adequate relevant plant experience in industry.He/she must have good communications skills.The candidate must be able to work as part of a multi-disciplined team.He/she must possess good risk awareness when planning and undertaking tasks, and be able to challenge those who do not. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        • llanwern, wales
        • permanent
        • £30,300 per year
        • randstad cpe
        Are you an electrical maintenance technician? Are you looking for a new and exciting challenge? This is a great role for you! The RoleAs an Electrician on site, you will report to the Maintenance Engineer and support the Operations team by performing any necessary repairs: undertaking preventative maintenance activities and facilitating the promotion of engineering solutions for process improvement to ensure process availability, quality and productivity are all optimised.The role exists to effectively maximise engineering availability to optimise unit production to meet the annual plan objectives for the works, which in turn ensures customer satisfaction on delivery and the profit levels of the business objectives.In this capacity, your key responsibilities will include but not be limited to the following:Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost; to good standards of workmanship and in conformance with all Company standards and procedures.Contribute to the determination and coordination of preventative maintenance programmes to ensure that unplanned downtime is avoided.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.Ensure that team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in a manner that fully complies with health & safety, quality, environmental and corporate policies.Be actively involved in own personal development plans to maximise performance in the role and the contribution to succession requirements of the business.Where required, contribute to team level annual operational and financial budgets that secure the resources necessary to achieve agreed work programmes. Initial shift pattern will see you working 7am - 4pm Monday to Thursday and 7am - 12.30pm on a Friday. The CandidateTo be considered for this opportunity, you will need to be a time served Electrician, and ideally be qualified to HNC level (or equivalent) in an appropriate electrical engineering discipline.Previous experience in a manufacturing or factory environment is also a requirement of the role, as is previous experience of works processes and control systems. You will also require the following:Ability to demonstrate initiative, drive and commitment.Flexibility and ability to adapt to ever changing demands.Ability to work safely under pressure and to tight timescales.Good all round education with string numeracy and literacy.Must be able to demonstrate a proactive approach to safety.An in depth knowledge of PLC's is an advantage. The BenefitsOur client offers their employees significant benefits packages. For this role, you will benefit from:35 days holidays per annum as standard (may vary dependent on shift pattern)Annual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
        Are you an electrical maintenance technician? Are you looking for a new and exciting challenge? This is a great role for you! The RoleAs an Electrician on site, you will report to the Maintenance Engineer and support the Operations team by performing any necessary repairs: undertaking preventative maintenance activities and facilitating the promotion of engineering solutions for process improvement to ensure process availability, quality and productivity are all optimised.The role exists to effectively maximise engineering availability to optimise unit production to meet the annual plan objectives for the works, which in turn ensures customer satisfaction on delivery and the profit levels of the business objectives.In this capacity, your key responsibilities will include but not be limited to the following:Maintain and repair processing machinery and ancillary equipment in a safe and productive manner in order to maximise availability at optimum cost; to good standards of workmanship and in conformance with all Company standards and procedures.Contribute to the determination and coordination of preventative maintenance programmes to ensure that unplanned downtime is avoided.Understand, deploy and seek to recommend improvements to production control procedures to support team performance objectives.Ensure that team operations, including those undertaken on the Company's behalf by third party service providers, are conducted in a manner that fully complies with health & safety, quality, environmental and corporate policies.Be actively involved in own personal development plans to maximise performance in the role and the contribution to succession requirements of the business.Where required, contribute to team level annual operational and financial budgets that secure the resources necessary to achieve agreed work programmes. Initial shift pattern will see you working 7am - 4pm Monday to Thursday and 7am - 12.30pm on a Friday. The CandidateTo be considered for this opportunity, you will need to be a time served Electrician, and ideally be qualified to HNC level (or equivalent) in an appropriate electrical engineering discipline.Previous experience in a manufacturing or factory environment is also a requirement of the role, as is previous experience of works processes and control systems. You will also require the following:Ability to demonstrate initiative, drive and commitment.Flexibility and ability to adapt to ever changing demands.Ability to work safely under pressure and to tight timescales.Good all round education with string numeracy and literacy.Must be able to demonstrate a proactive approach to safety.An in depth knowledge of PLC's is an advantage. The BenefitsOur client offers their employees significant benefits packages. For this role, you will benefit from:35 days holidays per annum as standard (may vary dependent on shift pattern)Annual Pay ReviewAnnual Bonus Scheme - subject to business performanceOne of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.Candidates must be eligible to live and work in the UK.For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

      thank you for subscribing to your personalised job alerts.

      It looks like you want to switch your language. This will reset your filters on your current job search.